GOLDWING TOURING DCT

LED Mirror Lights w/DRL & Sequential Turn Signal.

LED Mirror Lights w/DRL & Sequential Turn Signal. Bright LED white running light that turn to an amber sequential directional when activated.

Fits:

GL1800 2018/2021

Installation:

PathfinderLED Power Distribution Accessory Hub w/OEM harness.

Designed to safely connect your electronic accessories from a central location the PAH60 is a rugged weatherproof power distribution hub with advanced circuitry protection. Easily connect aftermarket lighting such as running lights, third brake lights, or auxiliary equipment without worrying about lighting errors or CANBUS fault codes while protecting your CANBUS electrical system. No complicated software to install/configure and no fuses to ever replace. The PAH60 connects to your 12v power (battery). Plenty of power to keep your entire electronics running! This is the solution to connecting various branded accessories from different manufacturers into one central hub.

Fits:

GL1800 2018/2021

Installation:

Rear Saddlebag Dynamic Sequential LED Lights.

Rear Multi-Function Saddlebag LED lights. These new Dynamic Saddlebag Lights have built in Running Lights + Dynamic Brake lights + Sequential turn signals to keep you visible and looking sharp on the road. Sold in Pairs.

NOTE: G184XP / PAH60 (sold separately). 2018-2020 GOLD WING MODELS ONLY: You can choose between the G184XP Cable Harness or the PAH60 Power Accessory Hub.

2021 GOLD WING MODELS ONLY: Requires connection through a Power Distribution Hub such as the PAH60W OR PAH60GX (Sold Separately). Will not work with the G184XP cables. You must choose the PAH60 or another power distribution source.

Fits:

GL1800 2018/2021

Intallation:

HIGH MOUNT MULTI FUNCTION LED BRAKE RUNNING LIGHT

This product integrates with the Chrome Trunk Rack and no doubt will add superior visibility to the rear of your bike. Designed with the rider in mind. High visibility features such as Dynamic Brake lights that flash rapidly when your brakes are applied and Dynamic Sequential turn signals sets your Gold Wing apart from stock models. When brakes are applied the Ultra Bright Dynamic LEDs activate in a rapid fire sequence which instantly alerts drivers behind you to respond quicker than they normally would...

Fits:

GL1800 UP TO 2018

Installation:

Cowl Light w/Sequential LED Turn Signal

GL1800 18-19 Cowl DRL Light w/Sequential LED Turn Signal (Requires G184XP Plug N Play cable harness)

Fits:

GL1800 UP TO 2018

Installation:

MULTI-FUNCTION FOG LIGHT KIT W/DRL + ENHANCED STROBE LED

This premium lighting kit exceeds OEM features and no other design comes close. The perfect addition to your new Gold Wing which will not only compliment the new head light design, this light will add some serious lighting. Designed from the ground up, our engineers use advanced projector optics which produces a clean beam pattern down the road and not scattered light, DOT COMPLIANT. This kit has 3 different lighting features and can be activated via the on/off switch on control panel. Mode A: Super Bright Mode - Fog Lights + DRL (Daytime Running Lights) Mode B: DRL (Daytime Running Lights) Enhanced LED Strobe Mode: For parade and show purposes...

FIts:

GL1800 UP TO 2018

Installation:

HIGH MOUNT MULTI FUNCTION LED BRAKE RUNNING LIGHT

This product integrates with the Chrome Trunk Rack and no doubt will add superior visibility to the rear of your bike. Designed with the rider in mind. High visibility features such as Dynamic Brake lights that flash rapidly when your brakes are applied and Dynamic Sequential turn signals sets your Gold Wing apart from stock models. When brakes are applied the Ultra Bright Dynamic LEDs activate in a rapid fire sequence which instantly alerts drivers behind you to respond quicker than they normally would...

Fits:

GL1800 UP TO 2018

Installation:

PLUG N PLAY CABLE HARNESS

Plug N Play wiring harness connects up to 4 different PathfinderLED front or rear lights. Easily installs PATHFINDERLED (2018+) accessories to factory Honda connection without any wire modifications and will not void factory warranty. All connectors are plug n play using OEM style connectors for a secure fit.

Fits:

GL1800 UO TO 2018

Installation:

Provides airflow to your calipers for cooling.

Minimizes brake dust buildup. Built-in LED position lights with on/off switch. Injection-molded ABS construction. Adds custom styling to your motorcycle. OEM style fit and finish. Plug ‘N Play installation(Requires G184XP Plug N Play Cable Harness).

Fits:

GL1800 UP TO 2018

Installation:

Rear-view mirror with LED

Available in chrome (like the original) or bluish.

Increases your overall visibility and strengthens your security, the must : it's elegant!

Easier to set up than the old version, the mirrors are now complete.

Fits:

GL1800 UP TO 2018

Installation:

2-PORT USB ACCESSORY SOCKET

This Auxiliary Socket has two- 2.1 amp USB power plugs for use in charging MP3, GPS, iPhones and other devices. Wire harness to Plug ‘N Go on GL1800 or use the universal splice connections to wire into any 12 volt system.

Fits:

All models.

Installation:

UNIVERSAL TRAILER HITCH RACK

Big Bike Parts® lets you take more on your ride without your trailer. The all new Universal Trailer Hitch Rack offers generous 16” x 10 ½” platform that can accommodate coolers, extra luggage, bags and more. Its 1 ½” high tubular frame is deep enough to secure your load and give you piece of mind while riding. A simple mounting bracket design uses your hitch ball as its mounting bolt with a custom designed washer that prevents movement once securely tightened. Works withmost receivers up to 3” wide and fits balls with up to a ¾” shank. As it mounts to the receiver ball mount, it fits with both horizontal and vertical receiver hitch assemblies...

Fits:

ALL GOLGWING with rack

Installation:

TOUR RACK RISERS

Big Bike Parts® now offers its Rack Risers in black satin for all those matte black racks being mounted. Our Black Satin Rack Risers provide more clearance under your luggage rack allowing for easier cleaning or getting all your other accessories to fit underneath. Universally fits ½’’ diameter round legged racks with custom recessed bevel to securely fit and extend your original rack legs 5/8’’ taller. Comes as 4 set kit with two sets of bolts; 4x6 mm (M6) and ¼- 20 bolts to replace the shorter bolts that come with most racks.

Fits:

GL1500

GL1800 2001/2020

Installation:

TRAILER HARNESS GL1800 2018

Big Bike Parts® has taken its popular Show Chrome Accessories® electronically isolated trailer wiring harness to the 2018 GL1800 Goldwing. With OEM matching connectors an easy install is accomplished with this Plug ‘N Go trailer harness. This 5 wire system is ready to go except for your trailer connector of choice. Plenty of zip ties will keep it secure and off the ground. Comes with complete instructions.

Fits:

GL1800 UP TO 2018

Installation:

VERTICAL RECEIVER HITCH GL1800

Big Bike Parts® is already delivering its all new receiver hitch for the 2018 Honda Goldwing. This vertical receiver design allows a clean look and is almost invisible when the receiver is not in use. This classic 1¼” receiver hitch mounts directly to the bike’s frame and sub frame with provided high strength bolts for a secure fitment. Includes Big Bike Parts® standard anti-chatter bolt design to remove excess movement, improving pulling smoothness and trailer tracking. Includes instructions and all required hardware and can be mounted without removal of the rear tire. Comes with 1 7/8” hitch ball. Fits all models of 2018 Honda Goldwing. Made in USA.

Fits:

GL1800 UP TO 2018

Installation:

AMBER LED MARKER LIGHT SET

Increase being seen and safer with Big Bike Parts® latest Dual Function Marker Lights for the 2018 GL1800 Goldwing. These truly outstanding LED Marker Lights replace the OEM reflectors with a pair of today’s brightest 24 SMD LED’s. Available in either Red or Amber LED’s with clear lenses to match the front mirror turnsignals for a coordinated OEM look. The LED assemblies are sealed for all weather protection and come with embedded bolt, locking pin and double sided tape to insure a secure fit. Includes full instructions and all required t-taps and spade connectors for a convenient install. Reflective backer used around LED’s to maximize candle output. Sold as a pair. High recommend BBP # 52-942 Isolation Block.

Fits:

GL1800 UP TO2018

Installation:

RED LED MARKER LIGHT SET

Increase being seen and safer with Big Bike Parts® latest Dual Function Marker Lights for the 2018 GL1800 Goldwing. These truly outstanding LED Marker Lights replace the OEM reflectors with a pair of today’s brightest 24 SMD LED’s. Available in either Red or Amber LED’s with clear lenses to match the front mirror turnsignals for a coordinated OEM look. The LED assemblies are sealed for all weather protection and come with embedded bolt, locking pin and double sided tape to insure a secure fit. Includes full instructions and all required t-taps and spade connectors for a convenient install. Reflective backer used around LED’s to maximize candle output. Sold as a pair. High recommend BBP # 52-942 Isolation Block.

Fits:

GL1800 UP TO 2018

Installation:

LED FOG LIGHTS GL1800 2018

A true and effective fog light disperses their beam low, wide and far to allow increased visibility and safety in rain and fog. Big Bike Parts® delivers with their latest Fog Lights for the new 2018 Goldwing. Rubber isolation bushings provide a stable, vibration free light just like the OEM. While they might look similar to the OEM, the LED’s are brighter and the bezel has been designed from scratch to provide a wider and longer photometric for a safer ride. Includes OEM style matching switch and full Plug ‘N Go wire harness. As with OEM, vertical adjustment is available for proper positioning.

Fits:

GL1800 UP TO 2018

Installation:

LAMPGARD GL1800 - 2018 NEWER

With 25 years of experience with their LampGard™ Headlight protectors, Big Bike Parts® adds the 2018 Goldwing to its touring fitments. With headlights getting more sophisticated, the new Goldwing is no exception and the replacement on a cracked assembly could set you back $1,500 or more. Protect it with a hard Acrylic LampGard™ that attaches with custom hook and loop fasteners for ease of cleaning and impact absorption. Sold as pair and with custom high heat adhesive on the attached hook and loop, they will not slide, move or come loose.

Fits:

GL1800 UP TO 2018

Installation:

DELUXE ARMREST

The selections of Big Bike Parts® Deluxe Passenger Armrests keeps expanding, with their latest offering for the 2018 Honda Goldwing from Show Chrome Accessories®. Custom clamps mount to the passenger handrails, providing a clean mount that is out of the way, allowing the armrests to pivot freely for easy passenger access on and off the bike. Includes chrome or black hardware and complete instructions to make installation easy. Available in Show Chrome Accessories® bright chrome or black satin finish for long term durability.

Fits:

GL1800 2018/2020

Installation:

GT TOUR TRUNK LIGHT

Big Bike Parts® GT Tour LED Trunk Light for the 2018 GL1800 trunk combines a subtle chrome accent with a pair of multi-function LED lights. The lights match the style of the lower tail lights and lens design. This trunk light puts visibility and a brake light where it needs to be, up high, to enhance safety. Lights provide running, brake and turn signals. Comes with complete instructions. High recommend BBP # 52-942 Isolation Block.

Fits:

GL 1800 2018/2020.

Installation:

REAR FENDER FILLER

This Rear Fender Filler from Show Chrome Accessories® closes the gaps that the rear fender misses on the 2018 and newer GL1800. It reduces flying road debris missed by the fender, reducing dust and dirt on your bike or trailer, keeping them cleaner. The flat surface created by this rear fender filler allows mounting of accessories and lights to a flat surface. Does not interfere with Show Chrome Accessories® 52-921 Trailer Hitch.

Fits:

GL1800 UP TO 2018

Installation:

ENGINE GUARD OPENING TRIM

This black polypropylene trim finishes the opening when you remove the OEM Engine Guard Cover. Ideal when mounting Highway Boards that attach to the case guard such as Show Chrome Accessories 21-353 and 21-354 Highway Boards and mounts. Sold as pair. Easily snaps into place once black engine guard cover is removed, providing a true finished look when using the case guard for mounting.

Fits:

GL1800 UP TO 2018

Installation:

UPPER WIND DEFLECTOR KIT

A true motorcycle accessory not only must do what it was designed to do, but it needs to look good while doing it. The old adage Form Follows Function, is a constant design practice at Big Bike Parts®, and this cannot be more evident than in their most recent Wind Deflectors for the GL1800. A true Wind Deflector will deflect as much weather away from the rider pocket as possible while still allowing the ability to bring air into the riding pocket at various angles for comfort. These Show Chrome Accessories® Upper and Lower Wind Deflectors do all of this very well...

Fits:

FL1800 UP  TO 2018

Installation:

LOWER WIND DEFLECTOR KIT

A true motorcycle accessory not only must do what it was designed to do, but it needs to look good while doing it. The old adage Form Follows Function, is a constant design practice at Big Bike Parts®, and this cannot be more evident than in their most recent Wind Deflectors for the GL1800. A true Wind Deflector will deflect as much weather away from the rider pocket as possible while still allowing the ability to bring air into the riding pocket at various angles for comfort. These Show Chrome Accessories® Upper and Lower Wind Deflectors do all of this very well...

Fits:

GL 1800 UP TO 2018

Installation: