Partie avant

LED Amber Lighted Gold or chrome Eagle Emblem.

This unique modern looking gold tone eagle has 14 super bright amber LED lights and works as a running and turnsignal light. The eagle has a slight curve to fit on many surfaces such as the windshield panel or trunk and uses self-adhesive tape to mount. Measures 7 inches x 2 inches. Single.

Fits:

Gold WIng All Models.

Inqtallation:

Chrome front mirror trims for GL1800 01-17

This tri-chromed front mirror trim fits the outer edges of the rear view mirror adding a nice contrast with the painted mirrors. Easy to install with self-adhesive tape.

Fits:

GL1800 2001/2017 and F6B.

Installation:

Gold Flying Curved Eagle Emblem.

This is a classic gold tone flying eagle design. Fits on any slightly curved surface such as the GL1500 windshield panel. Measures 6 inches wing tip to wing tip by 2 7/8 inches widest height.

Fits:

GL1500 and All models.

Installation:

ISO®-Grips

For the rider who demands the ultimate in comfort and style. Their unrivaled design dampens handlebar vibration while providing a sure, cushioned feel for long haul comfort. Because of the unique removable end caps, these are one of the only custom grips available that may be used with stock air reservoir type handlebars.

Fits:

GL1800 2001/2017

F6B 2013/2017

Installation:

2-PORT USB ACCESSORY SOCKET

This Auxiliary Socket has two- 2.1 amp USB power plugs for use in charging MP3, GPS, iPhones and other devices. Wire harness to Plug ‘N Go on GL1800 or use the universal splice connections to wire into any 12 volt system.

Fits:

All models.

Installation:

Kuryakyn grip end caps

Replacements for ISO-Grips or styling update for ISO-Flame, or Transformer Grips. Includes screws.

Fits:

GL1800 2001/2017

Use to K6180

Installation:

LED Battery Gauge

Our L.E.D. Battery Gauge is an array of L.E.D.'s indicating the operating voltage of the bike's electrical system. Green L.E.D.'s represent the normal operating range of your charging system, 12.5v to 14.5v. Amber L.E.D.'s warn the rider that the bike is not charging. Red L.E.D.'s will flash if the reading drops below 10v or exceeds 15v to alert the rider of an impending stall or the possibility of damage to the battery &/or sensitive electronic components on the motorcycle. Simple two-wire connection & a compact size (about 2" x 3/4" x 3/16") make installation a breeze. A daylight sensor automatically adjusts the brightness of the L.E.D.'s. Universal fitment designed for all 12v charging systems.

Fits:

ALL MODELS Before 2017

Installation:

Ergo Cruise Peg Mounts

Ergonomically designed for maximum driver comfort, these mounts have an unbelievable range of adjustment for the tall, short or in-between rider. The articulated mounting bracket is made of highly polished stainless steel for extreme strength, great looks and simple installation. The 6" long chrome swingarm has an ingenious locking mechanism and is canted at a 6º angle, which angles the pegs just the right amount for ideal comfort.

Fits:

GL1500 1998/2001 GL1800 2001/2017

Installation:

TEARDROP M.C. COVERS

Add a little chrome to your bike with Show Chrome Accessories Teardrop Master Cylinder covers. Aluminum die cast cylinder cover in teardrop design is a perfect extra to the handlebar area. Comes as a pair, fits Honda GL1500, GL1800 2001-17, Valkyrie, VTX1800, VT1100 1987-96, VT1300 Fury/Interstate/Stateline/Sabre, Yamaha Royal Stars.

Fits:

GL1500 1988/2001 GL1800 2001/2017

Installation:

Clutch or Brake Perch Mount

Perfect for iPhone®! Easily mount and secure an iPhone®, iPod®, smartphone, GPS or small device to your clutch or brake perch in just seconds. An adjustable swivel head allows movement for perfect positioning and disconnects in seconds! Each system includes a device holder of your choosing and Standard Accessory Mount. Standard Cradle holds devices measuring 1-5/8" to 3-5/8" wide. Large Cradle holds devices measuring 3-5/8" to 6" wide.

Fits:

All models.

Installation:

USB power source Black

Two USB ports (bottom = 1.0A and top = 2.1A) provide enough output for charging any modern device, including tablets. Mount anywhere you choose including inside your tour trunk, on the dash, or on your handlebars.

Fits:

All models.

Installation:

Usb power source

Two USB ports (bottom = 1.0A and top = 2.1A) provide enough output for charging any modern device, including tablets. Mount anywhere you choose including inside your tour trunk, on the dash, or on your handlebars.

Fits:

All models.

Installation:

Beverage Carrier Universal Drink Holders

Our most popular option to accommodate virtually any drink! Easy on, easy off snap design PVC leather Beverage Carrier easily holds most cups, cans or bottles, and is collapsible for storage. Additionally, the quick-detach thumbscrew mount leaves a simple clamp when not in use. Drink Ring has 3" inside diameter.

Fits:

All models.

Installation:

Electrical Power Point

Keep your cell phone, GPS, air pump or any other electrical device charged while on the road. Built into our Silver Bullet light housing and comes with cigarette lighter and everything you need to connect directly to your battery with a quick disconnect. Mount it above your handlebars or check for tank clearance and mount it below.

Fits:

All models

Installation:

Stainless Steel Mug Drink Holders

Whether sipping on hot or cold beverages, the insulated Stainless Mug & Drink Holder maintains your desired temperature for hours! The drink holder easily mounts on handlebars or clutch/brake perch mounts, and the quick-detach thumb screw offers easy removal when not in use.

Installation:

Mesh Basket Universal Drink Holders

Mesh basket features "fingers" to firmly grasp onto various-sized containers to keep your drink in the holder and not on you! Quick-detach thumbscrew mount leaves a simple clamp when not in use.

Installation:

BIG ASS™ DRINK HOLDER(NO MOUNT)

• The Ciro® Big Ass™ Drink Holder is the perfect way to bring that 30 oz. tumbler on the road with you.

• The durable neoprene rubber molded net is designed to securely grip your cup so there’s no worry of losing it.

• The rubber is also weatherproof and won’t deteriorate in the sun or elements you encounter on the road. 

• Designed to work with 30 oz. tumblers and other large bottles and cups.

• Made from durable neoprene rubber to grip and last.

• Mounts quickly to Ciro’s line of ball mounts.

• Features a 4-1/8” diameter opening.

• no mount.

Fits: 

Fits any Ciro ball mount.

Instalation: