GL1500

Side Cover Replacement Studs Only.

By JDKPlus and made in the U.S.A. These are high quality replacement studs perfect for Honda street and touring bikes. Two studs are provided with each stud measuring about 2 3/4 inches in length and 9/16 inch diameter. They can easily be cut or filed down to obtain the length required for the repair work. It is recommended new grommets be purchased for a good hold if the original ones are in poor condition. Pair.

Fits:

GL1500 - GL1800 2001/2017

Alls models.

Installetion:

Side Cover Replacement Studs with Adhesive.

By JDKPlus and made in the U.S.A. These are high quality replacement studs perfect for Honda street and touring bikes. Two studs are provided with each stud measuring about 2 3/4 inches in length and 9/16 inch diameter. They can easily be cut or filed down to obtain the length required for the repair work. Adhesive is included for mounting the studs onto the side covers. It is recommended new grommets be purchased for a good hold if the original ones are in poor condition. Pair.

Fits:

Gl1500

GL1800 2001 / 2017

Installation:

Oval Grommets.

These are oval rubber grommets. Every mechanic and do it yourself person needs these in their garage. 10 pack.

Fits:

GL1500 and GL1800.

Installation:

Side Cover Grommets.

These are round rubber grommets. Every mechanic and do it yourself person needs these in their garage. Fits the GL1000 to GL1800 and many other Honda street bikes. 10 pack.

Fits:

GL1800 2001/2017

Installation:

Gold Flying Eagle w/USA Flag.

This emblem has a gold flying eagle over two USA flags . Fits on any flat surface and uses self-adhesive tape to mount. Measures 3 inches x 1 ¾ inches. Single.

Fits:

All models

Installation:

Gold Flying Eagle w/USA Flag.

This very popular emblem has a gold flying eagle over two USA flags. Fits on any flat surface and uses self-adhesive tape to mount. Measures 4 ¼ inches x 2 ¾ inches. Single.

Fist:

All bikes.

Installation:

CanAm Chrome Decal w/Black Eagle

The chrome round disc measures 2 ¾ inches in diameter and is embossed with a black eagle. Uses self adhesive tape to mount on any flat surface and is a perfect fit for the front or rear on the Can Am®. Single.

Intallation:

Eagle Trim Emblems.

Chrome ABS eagle emblem is an attractive accent which has an eagle head and wing design measuring 7 inches in length The eagle is made with a light curve allowing it fit in a variety of places on many bikes, trikes or trailers. Easy to install with self-adhesive tape. Measure 7 inches long.

Fits:

All models.

Installation:

Chrome Steel Plugs ¼ "

The chrome steel plugs fit a ¼ inch screw giving the bike a finished, show bike look. 10 packs.

Fits:

All models

Installation:

Universal Accessory Lighted Switch Kit w/Chrome Plate.

This accessory kit will let you know accessories are on or off at the touch of your finger tips. Includes: wire harness, lighted switches and chrome ABS plate. Plate measures 2 ¼ inches x 2 ¼ inches and mounts using self-adhesive tape. Drilling is required for installation. Fits the GL1800 01-17, or on any flat surface.

Fits:

All models.

Installation:

Eagle Emblem.

Updated flying eagle emblem with self adhesive tape. Remove protective film to reveal the beautiful gold tone. Measures 1 3/4 inches x 1/2 inch.

Fits:

All models.

Installation:

Gold Wing w/USA Shield

This emblem has gold wings with a USA shield in the center. Fits any flat surface. Measures 3 inches x ⅞ inch. Single.

Fits:

All models

Installation:

ACCESSORY SOCKET

This Accessory Socket plugs in easily to on-bike accessory harness allowing easy use of GPS Units, Radar Detector, Cell Phone Charges, etc. Drilling required during installation. Plugs into existing wire harness, no splicing required.

Fits:

All models

Installation:

LED Amber Lighted Gold or chrome Eagle Emblem.

This unique modern looking gold tone eagle has 14 super bright amber LED lights and works as a running and turnsignal light. The eagle has a slight curve to fit on many surfaces such as the windshield panel or trunk and uses self-adhesive tape to mount. Measures 7 inches x 2 inches. Single.

Fits:

Gold WIng All Models.

Inqtallation:

Chrome front mirror trims for GL1800 01-17

This tri-chromed front mirror trim fits the outer edges of the rear view mirror adding a nice contrast with the painted mirrors. Easy to install with self-adhesive tape.

Fits:

GL1800 2001/2017 and F6B.

Installation:

Gold Flying Curved Eagle Emblem.

This is a classic gold tone flying eagle design. Fits on any slightly curved surface such as the GL1500 windshield panel. Measures 6 inches wing tip to wing tip by 2 7/8 inches widest height.

Fits:

GL1500 and All models.

Installation:

ISO®-Grips

For the rider who demands the ultimate in comfort and style. Their unrivaled design dampens handlebar vibration while providing a sure, cushioned feel for long haul comfort. Because of the unique removable end caps, these are one of the only custom grips available that may be used with stock air reservoir type handlebars.

Fits:

GL1800 2001/2017

F6B 2013/2017

Installation:

2-PORT USB ACCESSORY SOCKET

This Auxiliary Socket has two- 2.1 amp USB power plugs for use in charging MP3, GPS, iPhones and other devices. Wire harness to Plug ‘N Go on GL1800 or use the universal splice connections to wire into any 12 volt system.

Fits:

All models.

Installation:

Kuryakyn grip end caps

Replacements for ISO-Grips or styling update for ISO-Flame, or Transformer Grips. Includes screws.

Fits:

GL1800 2001/2017

Use to K6180

Installation:

LED Battery Gauge

Our L.E.D. Battery Gauge is an array of L.E.D.'s indicating the operating voltage of the bike's electrical system. Green L.E.D.'s represent the normal operating range of your charging system, 12.5v to 14.5v. Amber L.E.D.'s warn the rider that the bike is not charging. Red L.E.D.'s will flash if the reading drops below 10v or exceeds 15v to alert the rider of an impending stall or the possibility of damage to the battery &/or sensitive electronic components on the motorcycle. Simple two-wire connection & a compact size (about 2" x 3/4" x 3/16") make installation a breeze. A daylight sensor automatically adjusts the brightness of the L.E.D.'s. Universal fitment designed for all 12v charging systems.

Fits:

ALL MODELS Before 2017

Installation:

Ergo Cruise Peg Mounts

Ergonomically designed for maximum driver comfort, these mounts have an unbelievable range of adjustment for the tall, short or in-between rider. The articulated mounting bracket is made of highly polished stainless steel for extreme strength, great looks and simple installation. The 6" long chrome swingarm has an ingenious locking mechanism and is canted at a 6º angle, which angles the pegs just the right amount for ideal comfort.

Fits:

GL1500 1998/2001 GL1800 2001/2017

Installation:

Deluxe trunk luggage rack chrome or black

This large luggage rack was designed with the Honda Valkyrie Interstate in mind but fits perfectly on the Honda GL1800 Gold Wing as well as the GL1500 Gold Wing.

The manufacturer's trunk specs should be referenced for loading limits.

Dimension are 24"L x 13"W x 7 1/2"H.

The hardware comes with tapered stainless steel spacers that allow the rack to easily conform to the curve of almost any trunk.

These specially designed washers are recessed to allow the rack feet to sit into the spacer spreading the load over the trunk lid more equally.

Rubber washers assure a water tight fit to the trunk lid.

Works with OEM spoiler.

Fits:

GL1500 1987-2001

GL1800 2001-2020

BMW K16

Installation:

TEARDROP M.C. COVERS

Add a little chrome to your bike with Show Chrome Accessories Teardrop Master Cylinder covers. Aluminum die cast cylinder cover in teardrop design is a perfect extra to the handlebar area. Comes as a pair, fits Honda GL1500, GL1800 2001-17, Valkyrie, VTX1800, VT1100 1987-96, VT1300 Fury/Interstate/Stateline/Sabre, Yamaha Royal Stars.

Fits:

GL1500 1988/2001 GL1800 2001/2017

Installation:

Pathfinder LED High Performance Bulb.

Replace the 7443 bulb with the Pathfinder LED High Performance Bulb used for any 7443 applications. Popular on Goldwing/F6B for running, saddlebag and brake light LED upgrades. Instant intensity. 500LM. Red. Plug N' Play. By SoCalMotoGear. Note: There is no LED Flasher or Load Equalizer necessary when changing just your running/brake lights.

Fits:

GL1500- GL1800 2001-2017

Installation:

Clutch or Brake Perch Mount

Perfect for iPhone®! Easily mount and secure an iPhone®, iPod®, smartphone, GPS or small device to your clutch or brake perch in just seconds. An adjustable swivel head allows movement for perfect positioning and disconnects in seconds! Each system includes a device holder of your choosing and Standard Accessory Mount. Standard Cradle holds devices measuring 1-5/8" to 3-5/8" wide. Large Cradle holds devices measuring 3-5/8" to 6" wide.

Fits:

All models.

Installation: