Accessoires

Chrome radiator grille with LED

The TWINART LED Lighted Radiator Grill Panels offer bright LEDs that reflect and transform the radiator area into something you won't be able to take your eyes off of. Packed with a total of 40 bright white LEDs as well as 40 amber turn signal LEDs, this TWINART part draws attention from all angles. These feature run and turn lights and are back by a limited lifetime warranty against LED failure. Lights body are chrome, grill paneling is available in chrome or black.

use the 48000 Plug-N-Play

Fits:

GL1800 2018/2022

Installation:

Chrome rear brake master cylinder cover.

A small cover to brighten up the central part, a touch of chrome to embellish its GOLDWING.

Very easy to install and maintain.

Fits:

Gl1800 2018/2022

Installation:

Chrome brake master cylinder cover.

A small cover to brighten up its handlebars, a touch of chrome to embellish its GOLDWING.

Very easy to install and maintain.

Fits:

GL1800 2018/2022

Installation:

MANUAL CONTROLLER

This manual encoder will be necessary when you purchase the Shock & Awe® LED Strips (P/N 40056) and Engine Lighting Panels (P/N 40055) if you do not have an existing Shock & Awe® lighting set on your motorcycle.

Fits:

GL1800 2018/2022

Installation:

SHOCK & AWE® 2.0, CONTROLLER KIT

Unique 3 channel function allows there to be separate zones. Upgrade your Shock & Awe 1.0 to have the new speed function, music mode, and brake mode with this controller. Bluetooth controller is compatible with all Ciro Shock & Awe 2.0 (Including Shock & Awe 1.0)

Fits:

GL1800 2018/2022

Installation:

SHOCK & AWE® 2.0, 12" LED FLEX STRIPS

12" accessory LED Flex Strips to add more lights to your SHOCK & AWE 2.0 LED kit.

Two 12" LED Flex Strips that plug into Ciro SHOCK & AWE 2.0 LED kit.

Fits:

GL1800 2018/2022

Installation:

Shock & Awe® extension kit.

Shock & Awe® 2.0 dedicated expansion kit to put wherever you want.

Works in addition to the basic kit (C48031) or with a controller. (Manual controller (C41035) or Bluetooth controller (C42000)

12V system and Plug & Play.

2 light strip of 12 LEDs of 12 in.

2 wire extensions of 22 in.

2 Y dividers of 8 in.

Fits:

GL1800 2018/2022

Installation:

Shock & Awe® LED strips.

This is an additional kit for the Shock & Awe® LED kit (C48031).

Designed for mounting on your cylinder head lights, they can also go anywhere else.

Length : 9,8 in

Width : 0.2 in

Wire length: 48 in

The strips must be mounted with the basic Shock & Awe® LED kit or at least with a controller. (the manual C4200 or the Bluetooth C41035)

Fits:

GL1800  2018/2021

Installation:

Black Ultragard GT Touring Full Cover for GL.

Ultragard Goldwing GL1800, Goldwing GL1500, Goldwing GL1200, Valkyrie Interstate Full Bike Cover made of breathable water resistant lightweight polyester. Flannel lined panel to protect your windshield from scratches. Elastic hem. Rust proof grommets. Handy storage pouch. Antenna wear pad. High visibility reflective logo.

Color - Black/Charcoal

Fits:

GL1800 2001/2017

GL1500 1988/2000

GL1500 1984/1987

 GL1200 1999/2001

GL1500 Valkyrie Interstate

Installation:

J&M ROKKER® XXR 5.17” Fairing or Rear Speaker Upgrade Kit for 2018-2021 Honda® GoldWing.

Speaker Size:5.17” (in.) Diameter Frequency Response:35-18kHz Sensitivity:90 db Magnet Material:Lightweight Neodymium Impedance:3.5 Ohms Maximum Power:290 Watts RMS Power:200 Watts Cone Construction:Black Polycarbonate Mounting Depth:1 15/16” (in.) Weather Resistant:Yes OEM Size Match:Yes Quantity Per Package:2 Speakers - (1 pair)

Fits:

GL1800 2018/2022

Installation:

J&M ROKKER® XXRP 800w 4-CH DSP Programmable Amplifier kit for 2018-2021 Honda® GoldWing Tour/Std.

Output Power:

800w RMS Total - 200w x 4CH -- 2 or 4 ohm load

Amplifier Class:

Class D -- Properly Shielded No FM/AM Radio Interference

Power Supply:

12v Digital Switching -- Low Amperage Draw Compared to Other Brands in this Power Range

DSP Programmable:

Amplifier Internal Settings Fully Programmable thru the Internal Digital Signal Processor with Downloadable APP

External Dimensions:

Length 8.250" -- Width 5.125" -- Height 1.625"

Fits:

GL1800 2018/2022

Installation:

LED Trunk Light in Black or Chrome

Add to the back of your GoldWing night light, LED indicators and stop, elegant and bright. Super bright sequential red turn signals. This LED light will improve the appearance of your Goldwing while increasing visibility and safety on the road. Installs under any optional rack for maximum visibility.

Fits:

GL1800 2021

Installation:

Gold Flag Pole Eagle 2 ⅜ Inch

Gold tone eagle with a ¼ 20 thread can be used on most flag poles. Measures 2 ⅜ inches. Single.

Fits:

On flag poles.

Installation:

Chrome Windshield Strut Covers.

These Windshield Strut Covers are a great addition to the look of your bike. They are a chrome plated ABS plastic and will quickly give your bike a custom look.

FIts:

GL1800 2018/2021

Intallation:

Trunk/Saddlebag Carpet Set.

This carpet set is custom shaped to fit the NEW 2018-19 GL1800 Gold Wing. This is a four piece set for the trunk, right saddlebag and left saddlebag with or without the amp installed. This set helps protect the bottom of the trunk and saddlebags.

Fits:

GL1800 2018 to 2020

Installation:

Central Taillight Trim w/Red Lens Running & Brake Light.

Central Taillight Trim w/Red Lens Running & Brake Light. Ride safer by adding more visibility with this bright LED running and brake light. Replaces Saddlebag Rear Center Cover.

Fits:

GL1800 2018/2021

Installation:

LED Mirror Lights w/DRL & Sequential Turn Signal.

LED Mirror Lights w/DRL & Sequential Turn Signal. Bright LED white running light that turn to an amber sequential directional when activated.

Fits:

GL1800 2018/2021

Installation:

PathfinderLED Power Distribution Accessory Hub w/OEM harness.

Designed to safely connect your electronic accessories from a central location the PAH60 is a rugged weatherproof power distribution hub with advanced circuitry protection. Easily connect aftermarket lighting such as running lights, third brake lights, or auxiliary equipment without worrying about lighting errors or CANBUS fault codes while protecting your CANBUS electrical system. No complicated software to install/configure and no fuses to ever replace. The PAH60 connects to your 12v power (battery). Plenty of power to keep your entire electronics running! This is the solution to connecting various branded accessories from different manufacturers into one central hub.

Fits:

GL1800 2018/2021

Installation:

Rear Saddlebag Dynamic Sequential LED Lights.

Rear Multi-Function Saddlebag LED lights. These new Dynamic Saddlebag Lights have built in Running Lights + Dynamic Brake lights + Sequential turn signals to keep you visible and looking sharp on the road. Sold in Pairs.

NOTE: G184XP / PAH60 (sold separately). 2018-2020 GOLD WING MODELS ONLY: You can choose between the G184XP Cable Harness or the PAH60 Power Accessory Hub.

2021 GOLD WING MODELS ONLY: Requires connection through a Power Distribution Hub such as the PAH60W OR PAH60GX (Sold Separately). Will not work with the G184XP cables. You must choose the PAH60 or another power distribution source.

Fits:

GL1800 2018/2021

Intallation:

HIGH MOUNT MULTI FUNCTION LED BRAKE RUNNING LIGHT

This product integrates with the Chrome Trunk Rack and no doubt will add superior visibility to the rear of your bike. Designed with the rider in mind. High visibility features such as Dynamic Brake lights that flash rapidly when your brakes are applied and Dynamic Sequential turn signals sets your Gold Wing apart from stock models. When brakes are applied the Ultra Bright Dynamic LEDs activate in a rapid fire sequence which instantly alerts drivers behind you to respond quicker than they normally would...

Fits:

GL1800 UP TO 2018

Installation:

Cowl Light w/Sequential LED Turn Signal

GL1800 18-19 Cowl DRL Light w/Sequential LED Turn Signal (Requires G184XP Plug N Play cable harness)

Fits:

GL1800 UP TO 2018

Installation:

MULTI-FUNCTION FOG LIGHT KIT W/DRL + ENHANCED STROBE LED

This premium lighting kit exceeds OEM features and no other design comes close. The perfect addition to your new Gold Wing which will not only compliment the new head light design, this light will add some serious lighting. Designed from the ground up, our engineers use advanced projector optics which produces a clean beam pattern down the road and not scattered light, DOT COMPLIANT. This kit has 3 different lighting features and can be activated via the on/off switch on control panel. Mode A: Super Bright Mode - Fog Lights + DRL (Daytime Running Lights) Mode B: DRL (Daytime Running Lights) Enhanced LED Strobe Mode: For parade and show purposes...

FIts:

GL1800 UP TO 2018

Installation:

Speed Chrome Engine Covers

• Transform the look of your engine by replacing the dull, black plastic covers with our intricately designed chrome plated engine covers.

• Installation is made easy by simply bolting on the new covers. 

Fits : 

GL1800 Bagger / Touring Models 2018 and up. (Doesn't fit DCT models)

Installation :

Front Fork Leg Covers

• The Goldstrike™ Fork Leg Covers will completely transform the front of your motorcycle by covering up the dull, plain metal, front fork in either bright chrome or gloss black.

• Installation is easy and requires no disassembly of the fork.

Fits : 

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Installation :

Tie Down Brackets

• Tie-Down brackets for the 2018-up Gold Wing, give you a secure, easy-to-access location in which to strap down the front of your motorcycle during trailer transport or service.

• Powdercoated black to blend in with the motorcycle, but easy to find when needed. 

• Easy bolt-on installation.

• Sturdy, steel construction.

Fist:

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Installation :