Accessoires

Gold Flag Pole Eagle 2 ⅜ Inch

Gold tone eagle with a ¼ 20 thread can be used on most flag poles. Measures 2 ⅜ inches. Single.

Fits:

On flag poles.

Installation:

Chrome Windshield Strut Covers.

These Windshield Strut Covers are a great addition to the look of your bike. They are a chrome plated ABS plastic and will quickly give your bike a custom look.

FIts:

GL1800 2018/2021

Intallation:

Trunk/Saddlebag Carpet Set.

This carpet set is custom shaped to fit the NEW 2018-19 GL1800 Gold Wing. This is a four piece set for the trunk, right saddlebag and left saddlebag with or without the amp installed. This set helps protect the bottom of the trunk and saddlebags.

Fits:

GL1800 2018 to 2020

Installation:

Central Taillight Trim w/Red Lens Running & Brake Light.

Central Taillight Trim w/Red Lens Running & Brake Light. Ride safer by adding more visibility with this bright LED running and brake light. Replaces Saddlebag Rear Center Cover.

Fits:

GL1800 2018/2021

Installation:

LED Mirror Lights w/DRL & Sequential Turn Signal.

LED Mirror Lights w/DRL & Sequential Turn Signal. Bright LED white running light that turn to an amber sequential directional when activated.

Fits:

GL1800 2018/2021

Installation:

PathfinderLED Power Distribution Accessory Hub w/OEM harness.

Designed to safely connect your electronic accessories from a central location the PAH60 is a rugged weatherproof power distribution hub with advanced circuitry protection. Easily connect aftermarket lighting such as running lights, third brake lights, or auxiliary equipment without worrying about lighting errors or CANBUS fault codes while protecting your CANBUS electrical system. No complicated software to install/configure and no fuses to ever replace. The PAH60 connects to your 12v power (battery). Plenty of power to keep your entire electronics running! This is the solution to connecting various branded accessories from different manufacturers into one central hub.

Fits:

GL1800 2018/2021

Installation:

Rear Saddlebag Dynamic Sequential LED Lights.

Rear Multi-Function Saddlebag LED lights. These new Dynamic Saddlebag Lights have built in Running Lights + Dynamic Brake lights + Sequential turn signals to keep you visible and looking sharp on the road. Sold in Pairs.

NOTE: G184XP / PAH60 (sold separately). 2018-2020 GOLD WING MODELS ONLY: You can choose between the G184XP Cable Harness or the PAH60 Power Accessory Hub.

2021 GOLD WING MODELS ONLY: Requires connection through a Power Distribution Hub such as the PAH60W OR PAH60GX (Sold Separately). Will not work with the G184XP cables. You must choose the PAH60 or another power distribution source.

Fits:

GL1800 2018/2021

Intallation:

HIGH MOUNT MULTI FUNCTION LED BRAKE RUNNING LIGHT

This product integrates with the Chrome Trunk Rack and no doubt will add superior visibility to the rear of your bike. Designed with the rider in mind. High visibility features such as Dynamic Brake lights that flash rapidly when your brakes are applied and Dynamic Sequential turn signals sets your Gold Wing apart from stock models. When brakes are applied the Ultra Bright Dynamic LEDs activate in a rapid fire sequence which instantly alerts drivers behind you to respond quicker than they normally would...

Fits:

GL1800 UP TO 2018

Installation:

Cowl Light w/Sequential LED Turn Signal

GL1800 18-19 Cowl DRL Light w/Sequential LED Turn Signal (Requires G184XP Plug N Play cable harness)

Fits:

GL1800 UP TO 2018

Installation:

MULTI-FUNCTION FOG LIGHT KIT W/DRL + ENHANCED STROBE LED

This premium lighting kit exceeds OEM features and no other design comes close. The perfect addition to your new Gold Wing which will not only compliment the new head light design, this light will add some serious lighting. Designed from the ground up, our engineers use advanced projector optics which produces a clean beam pattern down the road and not scattered light, DOT COMPLIANT. This kit has 3 different lighting features and can be activated via the on/off switch on control panel. Mode A: Super Bright Mode - Fog Lights + DRL (Daytime Running Lights) Mode B: DRL (Daytime Running Lights) Enhanced LED Strobe Mode: For parade and show purposes...

FIts:

GL1800 UP TO 2018

Installation:

Speed Chrome Engine Covers

• Transform the look of your engine by replacing the dull, black plastic covers with our intricately designed chrome plated engine covers.

• Installation is made easy by simply bolting on the new covers. 

Fits : 

GL1800 Bagger / Touring Models 2018 and up. (Doesn't fit DCT models)

Installation :

Front Fork Leg Covers

• The Goldstrike™ Fork Leg Covers will completely transform the front of your motorcycle by covering up the dull, plain metal, front fork in either bright chrome or gloss black.

• Installation is easy and requires no disassembly of the fork.

Fits : 

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Installation :

Tie Down Brackets

• Tie-Down brackets for the 2018-up Gold Wing, give you a secure, easy-to-access location in which to strap down the front of your motorcycle during trailer transport or service.

• Powdercoated black to blend in with the motorcycle, but easy to find when needed. 

• Easy bolt-on installation.

• Sturdy, steel construction.

Fist:

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Installation : 

SHOCK & AWE® 2.0, 8" Y-SPLITTERS

• 8" Y-Splitters to add additional light strips to your SHOCK & AWE® 2.0 kit. 

• Two 8" "Y" Splitters.

Fits:

GOLDWING 1800 UP 2018

Instalation:

PASSENGER ARMRESTS FOR NEW GOLDWING

• Keeping your passenger comfortable is the key to a long and enjoyable ride. The Goldstrike™ Passenger Armrests provide unparalleled comfort, durability, and even an accessory port that allows you to bring our Big Ass™ Drink Holder along on your ride. **Accessory adapter included with armrests, Drink Holder shown in image 4 not included.

• Easy installation with only a screwdriver

• Requires no permanent modification to your motorcycle

• Made from soft-touch, durable rubber with a rigid aluminum frame

• Features an accessory port on both sides

• Accessory adapter pivots so your drink stays level when opening the trunk

• Works great with Goldstrike™ P/N C58007 *Patent Pending

Compatible :

Instalation:

LED FLAG POLE TURN SIGNAL MODULE

• Installing with LIGHTED FLAG POLE ( P/N C450 OR C460) to activate turn signal function.

• It will activate amber turn signal.

• Goldstrike Plug & Play Installation kit(C48000) required.

Compatible :

GL1800 Touring / Touring DCT Models 2018 and up.

Instalation :

SADDLEBAG GUARD COVERS

The stock saddlebag guards leave a lot to be desired.

Twinart has created chrome ABS covers that install eaily and add just the right amount of sophistication to an otherwise mundane component.

Compatible :

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Instalation

Shock & Awe® 2.0 takes your LED lighting kit to the next level. Along with being fully programmable for color, flash and pattern modes, we’ve packed the app full of exciting features. Racing mode to track your speed, music and microphone integration, 3 channel output, and even camera integration to capture custom colors. New smart brake function makes your light kit turn red when brakes are applied, and with the Ciro® Bluetooth app you are able to choose from a million colors to find the perfect match for your bike. Our lighting kit includes detailed placement instructions and plug-n-play wiring to make installation a breeze.

Instalation:

LED Engine Lighting Panels Shock & Awe®

Goldstrike LED Engine Lighting Panels are the go-to part to dress up the top of the cylinder heads. These slim, chrome housingsand bright amber LED running lights create remarkable visibility combined with unmistakable Goldstrike style. Functions as eye catching amber running lights, standard, and can be used with our Plug-N-Play Harness (P/N 48000) to add turn function as well.

Designed with air channels for excellent cooling. Heat reflective tape insulates the lights from engine heat. Adds lighting to the side of the bike, greatly increasing visibility. Installs in minutes with standard tools.

Compatible :

GL1800 2018/2022

Installation :

• The Goldstrike™ Filler Panel Lights add super bright LEDs to the back of your bike to help be sure you’re seen.

• Featuring high intensity plasma amber turn signals, red run and brake lights. Light-pipe technology and ground breaking optics allow for visibility even when viewed from a sharp side angle.

• These are a must for any rider.

Fits :

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Installation :

HIGH MOUNT MULTI FUNCTION LED BRAKE RUNNING LIGHT

This product integrates with the Chrome Trunk Rack and no doubt will add superior visibility to the rear of your bike. Designed with the rider in mind. High visibility features such as Dynamic Brake lights that flash rapidly when your brakes are applied and Dynamic Sequential turn signals sets your Gold Wing apart from stock models. When brakes are applied the Ultra Bright Dynamic LEDs activate in a rapid fire sequence which instantly alerts drivers behind you to respond quicker than they normally would...

Fits:

GL1800 UP TO 2018

Installation:

PLUG N PLAY CABLE HARNESS

Plug N Play wiring harness connects up to 4 different PathfinderLED front or rear lights. Easily installs PATHFINDERLED (2018+) accessories to factory Honda connection without any wire modifications and will not void factory warranty. All connectors are plug n play using OEM style connectors for a secure fit.

Fits:

GL1800 UO TO 2018

Installation:

Provides airflow to your calipers for cooling.

Minimizes brake dust buildup. Built-in LED position lights with on/off switch. Injection-molded ABS construction. Adds custom styling to your motorcycle. OEM style fit and finish. Plug ‘N Play installation(Requires G184XP Plug N Play Cable Harness).

Fits:

GL1800 UP TO 2018

Installation:

Rear-view mirror with LED

Available in chrome (like the original) or bluish.

Increases your overall visibility and strengthens your security, the must : it's elegant!

Easier to set up than the old version, the mirrors are now complete.

Fits:

GL1800 UP TO 2018

Installation:

Smart Mount™ Backrests

Big Bike Parts® eleventh fitment of their Smart Mount™ Backrest is for the all-new 2018 Goldwing series. This market proven leader has also become a quick detachable system, allowing the backrest pad and mount to easily detach and be removed through the OEM seat opening, providing a clean look when not installed. As with all Smart Mount™ Backrests, riders enjoy 3” of horizontal pad adjustment and 1” of vertical pad adjustment to ensure a comfortable ride. With the use of Hopnel™ special density comfort foam the pad holds up to daily use without wearing. Made in the USA.

Fits:

GL1800 2018/2020

Installation: