AIRBAG GPS

FOLDING FLAG POLE TRUNK

Support your veterans or local riding club with this custom-designed motorcycle accessory made from billet aluminum. Its convenient folding feature allows it to accommodate covers, and can be mounted on either the left or right side of your bike.

All necessary hardware is included for easy installation.

Compatible :

All models on flat panel

Installation :

FLAG POLE TRUNK

Show your support for veterans or riding clubs with our custom-designed motorcycle mount.

Made with zinc-plated hardware and aluminum mounts, it's available in chrome or black and mounts on either side of your bike.

Compatible :

All models on flat panel

Installation :

CanAm Chrome Decal w/Black Eagle

The chrome round disc measures 2 ¾ inches in diameter and is embossed with a black eagle. Uses self adhesive tape to mount on any flat surface and is a perfect fit for the front or rear on the Can Am®. Single.

Intallation:

Chrome Headlight Side Trims.

This accent is made of tri-chromed ABS and covers the lip that runs along the outside front fairing under the headlights. These small chrome accents adds definition to this area of the bike and compliments other chrome pieces nicely. Easy to install with double sided tape.

Fits:

GL1800 2012-2017 and F6B.

Installation:

Chrome front mirror trims for GL1800 01-17

This tri-chromed front mirror trim fits the outer edges of the rear view mirror adding a nice contrast with the painted mirrors. Easy to install with self-adhesive tape.

Fits:

GL1800 2001/2017 and F6B.

Installation:

Chrome grip damper for GL1800.

This chrome damper replaces the black one on the bike giving the bike an extra chrome accent which pairs up nicely with chrome grips for a classy look.

Fits:

GL1800 and F6B

Installation:

Chrome Steel Plugs ¼ "

The chrome steel plugs fit a ¼ inch screw giving the bike a finished, show bike look. 10 packs.

Fits:

All models

Installation:

Universal Accessory Lighted Switch Kit w/Chrome Plate.

This accessory kit will let you know accessories are on or off at the touch of your finger tips. Includes: wire harness, lighted switches and chrome ABS plate. Plate measures 2 ¼ inches x 2 ¼ inches and mounts using self-adhesive tape. Drilling is required for installation. Fits the GL1800 01-17, or on any flat surface.

Fits:

All models.

Installation:

Gold Flying Curved Eagle Emblem.

This is a classic gold tone flying eagle design. Fits on any slightly curved surface such as the GL1500 windshield panel. Measures 6 inches wing tip to wing tip by 2 7/8 inches widest height.

Fits:

GL1500 and All models.

Installation:

Eagle Emblem.

Updated flying eagle emblem with self adhesive tape. Remove protective film to reveal the beautiful gold tone. Measures 1 3/4 inches x 1/2 inch.

Fits:

All models.

Installation:

Gold Wing w/USA Shield

This emblem has gold wings with a USA shield in the center. Fits any flat surface. Measures 3 inches x ⅞ inch. Single.

Fits:

All models

Installation:

SMOKE LIMITED EDITION BADGE

SMOKE LIMITED EDITION, Emblem.

Fits:

GL1800 2001/2017

Installation:

LED Logo Surrounds

The LED logo surround enhances the brand and increases lateral visibility.

Soft illumination dims and flashes amber when you activate your turn signals.

This fits under all Honda emblems placed on plastic fairings (not suitable for steel tanks for example)

The installation requires a connection that we will indicate to you according to the models.

Sold in pairs.

Models:

GL1800 2001-2022

Instalation:

Pathfinder LED High Performance Bulb.

Replace the 7443 bulb with the Pathfinder LED High Performance Bulb used for any 7443 applications. Popular on Goldwing/F6B for running, saddlebag and brake light LED upgrades. Instant intensity. Plug N' Play. By SoCalMotoGear. Note: There is no LED Flasher or Load Equalizer necessary when changing just your running/brake lights

Fits:

GL1800 2001/2017

Installation:

Side Fairing Logo Accents.

These tri-chromed accents bring out the bike's great contours on the front fairing. The part completely encircles the bike logo so it is still exposed. Easy to install with adhesive tape. A perfect fit with Add On part 45-1696, chrome air intake accents.

Fits:

GL1800 2012/2017.

F6B.

Installation:

Chrome Air Intake Accent.

These tri-chromed ABS side fairing accents are gorgeous and stylish. They make the outside fairing really pop with chrome and follow the contours of the bike. They install with tape and silicone for a secure fit.

Fits:

GL1800 2012/2017.

Installation:

Chrome Radio Knobs.

These chrome ABS radio knobs are a complete replacement for the OEM black ones on the bike. They have a raised eagle on each to make them unique and the chrome adds a nice touch to the inside fairing on the bike.

Fits:

GL1800 2012/2017 and F6B.

Installation:

Fairing Side Trims.

Tri-chromed ABS accents go over the black OEM areas on the front inside fairing panels and along the strip next to the radio and dash pouches following the curves of the bike. A great chrome designed to make the bike a real standout. Installation is very easy using double sided tape. Designed to fit with Add On part 45-1296 GL1800 12-17 Dash Door Accents.

Fits:

GL1800 2012/2017 and F6B.

Installation:

Chrome Side Windshield Panel Accents.

These tri-chromed ABS accents will add a dramatic distinctive look to the bike. The part follows the contour of the windshield's outer edges while still allowing the color of the bike to still be exposed. They also help to cover weather worn or damaged panels. Attaches with self-adhesive tape. This part can be used with other chrome accents like Add On Part 45-1295, Chrome Mask.

Fits :

GL1800 2012/2016 and F6B.

Installation:

Dash Door Accents.

These chrome ABS dash door accents add a great look and make the dash doors pop against the black material of the bike. The set includes a right and left chrome trim which outlines the dash doors and a chrome accent to cover the latch on the clutch side door of the bike. They are easy to install using the silicone which is included. Redesigned to fit with Add On part 45-1297 GL1800 12 & Up Fairing Side Trims.

Fits:

GL1800 2012-2017

Installation:

Chrome Windshield Panel Mask.

This tri-chromed ABS accent adds a dramatic look to the front face of the bike. The part follows the front contours of the windshield panel and still allows the color of the bike to still be exposed. They also help to cover weather worn or damaged panels and look great with other chrome accents. Easy to install with adhesive tape.

Fits:

GL1800 2012/2016 and F6B.

Installation:

LED Amber Lighted Gold or chrome Eagle Emblem.

This unique modern looking gold tone eagle has 14 super bright amber LED lights and works as a running and turnsignal light. The eagle has a slight curve to fit on many surfaces such as the windshield panel or trunk and uses self-adhesive tape to mount. Measures 7 inches x 2 inches. Single.

Fits:

Gold WIng All Models.

Inqtallation:

GL1800 01-17 Chrome Mirror Housings.

Beautiful chrome mirror housings replace the stock ones on the bike. They create a fantastic chrome accents to the front of the bike or can be used to economically replacement for weather worn or damaged ones. The also look great along with other chrome accents for the front of the bike.

Fits:

GL1800 2001/2017.

Installation:

Lighted Front Fender Eagle.

Lighted Front Fender Eagle with a modern updated sleek looking eagle. It has LED lighted eyes and mouth. It is made of chrome ABS and uses self-adhesive tape to mount. The eagle can be used unlit or if lighted, requires drilling.

Fits:

all Gold Wings and many other bike fenders with it curve.

Installation:

H7 LED PATNFINDER

LED headlight bulbs for the GL1800 and F6B. These new improved bulbs are 3X brighter and have the new generation LED with 4000 theoretical lumens, 6000K color temperature. They are solid state LED bulbs and come as pairs. Plug and play and adapter ring comes off for easy install as easy as OEM bulbs. They have a passive cooling system that dissipates heat efficiently putting them above others on the market because there are no moving parts. The bulbs works on a 12 Volt system at 1.5 AMPs per bulb whereas stock bulbs draw 4-5 AMPs per bulb. Used as high or low beam for the GL1800 and F6B.

Fits:

GL1800 2001/2017

Installation: