GL1800 2006-2010

Side Cover Replacement Studs Only.

By JDKPlus and made in the U.S.A. These are high quality replacement studs perfect for Honda street and touring bikes. Two studs are provided with each stud measuring about 2 3/4 inches in length and 9/16 inch diameter. They can easily be cut or filed down to obtain the length required for the repair work. It is recommended new grommets be purchased for a good hold if the original ones are in poor condition. Pair.

Fits:

GL1500 - GL1800 2001/2017

Alls models.

Installetion:

Side Cover Replacement Studs with Adhesive.

By JDKPlus and made in the U.S.A. These are high quality replacement studs perfect for Honda street and touring bikes. Two studs are provided with each stud measuring about 2 3/4 inches in length and 9/16 inch diameter. They can easily be cut or filed down to obtain the length required for the repair work. Adhesive is included for mounting the studs onto the side covers. It is recommended new grommets be purchased for a good hold if the original ones are in poor condition. Pair.

Fits:

Gl1500

GL1800 2001 / 2017

Installation:

Slotted Grommet.

This is a slotted rubber grommet. Every mechanic and do it yourself person needs these in their garage. 10 pack

Fits:

GL1800.

Installation:

Reusable Snaps.

This is a reusable snap. Every mechanic and do it yourself person needs these in their garage. 10 pack.

Fits:

GL1800.

Installation:

Oval Grommets.

These are oval rubber grommets. Every mechanic and do it yourself person needs these in their garage. 10 pack.

Fits:

GL1500 and GL1800.

Installation:

Trunk Replacement Bulb - Red LED

Replacement red trunk light has 10 bright LEDs mounted in a 360° clear housing with a red base. Dual filament. Single

Fits:

GL1800

Installation:

Replacement Amber Bulb.

Replacement amber bulb 12V 21/5W for the front directional lights. Works with Add On parts 45-1228 and 45-1228S front directional lights.Single

Fits:

GL1800

Installation:

Gold Flying Eagle w/USA Flag.

This emblem has a gold flying eagle over two USA flags . Fits on any flat surface and uses self-adhesive tape to mount. Measures 3 inches x 1 ¾ inches. Single.

Fits:

All models

Installation:

Gold Flying Eagle w/USA Flag.

This very popular emblem has a gold flying eagle over two USA flags. Fits on any flat surface and uses self-adhesive tape to mount. Measures 4 ¼ inches x 2 ¾ inches. Single.

Fist:

All bikes.

Installation:

FOLDING FLAG POLE TRUNK

Support your veterans or local riding club with this custom-designed motorcycle accessory made from billet aluminum. Its convenient folding feature allows it to accommodate covers, and can be mounted on either the left or right side of your bike.

All necessary hardware is included for easy installation.

Compatible :

All models on flat panel

Installation :

FLAG POLE TRUNK

Show your support for veterans or riding clubs with our custom-designed motorcycle mount.

Made with zinc-plated hardware and aluminum mounts, it's available in chrome or black and mounts on either side of your bike.

Compatible :

All models on flat panel

Installation :

CanAm Chrome Decal w/Black Eagle

The chrome round disc measures 2 ¾ inches in diameter and is embossed with a black eagle. Uses self adhesive tape to mount on any flat surface and is a perfect fit for the front or rear on the Can Am®. Single.

Intallation:

Chrome grip damper for GL1800.

This chrome damper replaces the black one on the bike giving the bike an extra chrome accent which pairs up nicely with chrome grips for a classy look.

Fits:

GL1800 and F6B

Installation:

Gold Flying Curved Eagle Emblem.

This is a classic gold tone flying eagle design. Fits on any slightly curved surface such as the GL1500 windshield panel. Measures 6 inches wing tip to wing tip by 2 7/8 inches widest height.

Fits:

GL1500 and All models.

Installation:

Chrome Steel Plugs ¼ "

The chrome steel plugs fit a ¼ inch screw giving the bike a finished, show bike look. 10 packs.

Fits:

All models

Installation:

Eagle Emblem.

Updated flying eagle emblem with self adhesive tape. Remove protective film to reveal the beautiful gold tone. Measures 1 3/4 inches x 1/2 inch.

Fits:

All models.

Installation:

Universal Accessory Lighted Switch Kit w/Chrome Plate.

This accessory kit will let you know accessories are on or off at the touch of your finger tips. Includes: wire harness, lighted switches and chrome ABS plate. Plate measures 2 ¼ inches x 2 ¼ inches and mounts using self-adhesive tape. Drilling is required for installation. Fits the GL1800 01-17, or on any flat surface.

Fits:

All models.

Installation:

Gold Wing w/USA Shield

This emblem has gold wings with a USA shield in the center. Fits any flat surface. Measures 3 inches x ⅞ inch. Single.

Fits:

All models

Installation:

Lampgard Headlight Protector

This clear LampGard™ Headlight Protector is designed to cover the entire GL1800 headlight, offering superior protection against flying rocks and other road debris. Securely attaches with 3M Dual Lock™ fasteners.

Fits:

GL1800 2001/2017

Installation:

FENDER EXTENSION

This Smoke Chrome Front Fender Extension is perfectly contoured to the front fender. Fender Extension is made of chromed ABS and extends the front fender down seven inches. Installation requires drilling. Comes with fender brackets. Fits Honda GL1800 (non airbag models).

Fits:

GL1800 2001/2017 No Airbag

Installation:

SMOKE LIMITED EDITION BADGE

SMOKE LIMITED EDITION, Emblem.

Fits:

GL1800 2001/2017

Installation:

Front Fender Extension with Mud Flap

Besides looking sharp, these will really tame the road spray when riding in the rain. The stylish chrome extension incorporates a black rubber mud flap and extends the fender by four inches. The fasteners included for installation have custom, streamlined heads for a smooth, clean appearance.

Fits:

GL1800 2001/2017

Installation:

4 1/2" 2-WAY NEODYMIUM SPEAKERS

• Waterproof 
• Premier sound quality 
• High output midrange speaker 
• Sturdy and reliable technology

Compatible :

GL1800 Touring from 2018 and up

Installation :

LED Logo Surrounds

The LED logo surround enhances the brand and increases lateral visibility.

Soft illumination dims and flashes amber when you activate your turn signals.

This fits under all Honda emblems placed on plastic fairings (not suitable for steel tanks for example)

The installation requires a connection that we will indicate to you according to the models.

Sold in pairs.

Models:

GL1800 2001-2022

Instalation:

Pathfinder LED High Performance Bulb.

Replace the 7443 bulb with the Pathfinder LED High Performance Bulb used for any 7443 applications. Popular on Goldwing/F6B for running, saddlebag and brake light LED upgrades. Instant intensity. Plug N' Play. By SoCalMotoGear. Note: There is no LED Flasher or Load Equalizer necessary when changing just your running/brake lights

Fits:

GL1800 2001/2017

Installation: