GOLDWING TOURING

Active filters

  • Eagle Trim Emblems

    €56.00

    Eagle Trim Emblems.

    Chrome ABS eagle emblem is an attractive accent which has an eagle head and wing design measuring 7 inches in length The eagle is made with a light curve allowing it fit in a variety of places on many bikes, trikes or trailers. Easy to install with self-adhesive tape. Measure 7 inches long.

    Fits:

    All models.

    Installation:

  • LED Amber Lighted Gold...

    €88.00

    LED Amber Lighted Gold or chrome Eagle Emblem.

    This unique modern looking gold tone eagle has 14 super bright amber LED lights and works as a running and turnsignal light. The eagle has a slight curve to fit on many surfaces such as the windshield panel or trunk and uses self-adhesive tape to mount. Measures 7 inches x 2 inches. Single.

    Fits:

    Gold WIng All Models.

    Inqtallation:

  • Chrome Windshield...

    €65.00

    Chrome Windshield Strut Covers.

    These Windshield Strut Covers are a great addition to the look of your bike. They are a chrome plated ABS plastic and will quickly give your bike a custom look.

    FIts:

    GL1800 2018/2021

    Intallation:

  • Eagle Emblem

    €7.00

    Eagle Emblem.

    Updated flying eagle emblem with self adhesive tape. Remove protective film to reveal the beautiful gold tone. Measures 1 3/4 inches x 1/2 inch.

    Fits:

    All models.

    Installation:

  • Gold Wing w/USA Shield

    €8.00

    Gold Wing w/USA Shield

    This emblem has gold wings with a USA shield in the center. Fits any flat surface. Measures 3 inches x ⅞ inch. Single.

    Fits:

    All models

    Installation:

  • Catalog 1800 Trunk...

    €30.00

    Catalog  1800 Trunk Half Lid Pouch with Reflectors.

    This black trunk lid pouch fits into the trunk lid and allows for more trunk storage and quick to reach items. Our slim line design allows more room up into the lid for items like helmets. Velcro closures are on all pockets. We have included reflective tape for added safety when stopped on the side of a road. Mounts into existing hardware.

    Fits:

    The GL1800

    Bagger with origine trunk

    Installation:

  • Trunk/Saddlebag Carpet...

    €59.90

    Trunk/Saddlebag Carpet Set.

    This carpet set is custom shaped to fit the NEW 2018-19 GL1800 Gold Wing. This is a four piece set for the trunk, right saddlebag and left saddlebag with or without the amp installed. This set helps protect the bottom of the trunk and saddlebags.

    Fits:

    GL1800 2018 to 2020

    Installation:

  • Central Taillight Trim...

    €160.00

    Central Taillight Trim w/Red Lens Running & Brake Light.

    Central Taillight Trim w/Red Lens Running & Brake Light. Ride safer by adding more visibility with this bright LED running and brake light. Replaces Saddlebag Rear Center Cover.

    Fits:

    GL1800 2018/2021

    Installation:

  • LED Mirror Lights...

    €380.00

    LED Mirror Lights w/DRL & Sequential Turn Signal.

    LED Mirror Lights w/DRL & Sequential Turn Signal. Bright LED white running light that turn to an amber sequential directional when activated.

    Fits:

    GL1800 2018/2021

    Installation:

  • PathfinderLED Power...

    €220.00

    PathfinderLED Power Distribution Accessory Hub w/OEM harness.

    Designed to safely connect your electronic accessories from a central location the PAH60 is a rugged weatherproof power distribution hub with advanced circuitry protection. Easily connect aftermarket lighting such as running lights, third brake lights, or auxiliary equipment without worrying about lighting errors or CANBUS fault codes while protecting your CANBUS electrical system. No complicated software to install/configure and no fuses to ever replace. The PAH60 connects to your 12v power (battery). Plenty of power to keep your entire electronics running! This is the solution to connecting various branded accessories from different manufacturers into one central hub.

    Fits:

    GL1800 2018/2021

    Installation:

  • Rear Saddlebag Dynamic...

    €389.00

    Rear Saddlebag Dynamic Sequential LED Lights.

    Rear Multi-Function Saddlebag LED lights. These new Dynamic Saddlebag Lights have built in Running Lights + Dynamic Brake lights + Sequential turn signals to keep you visible and looking sharp on the road. Sold in Pairs.

    NOTE: G184XP / PAH60 (sold separately). 2018-2020 GOLD WING MODELS ONLY: You can choose between the G184XP Cable Harness or the PAH60 Power Accessory Hub.

    2021 GOLD WING MODELS ONLY: Requires connection through a Power Distribution Hub such as the PAH60W OR PAH60GX (Sold Separately). Will not work with the G184XP cables. You must choose the PAH60 or another power distribution source.

    Fits:

    GL1800 2018/2021

    Intallation:

  • HIGH MOUNT MULTI...

    €248.00

    HIGH MOUNT MULTI FUNCTION LED BRAKE RUNNING LIGHT

    This product integrates with the Chrome Trunk Rack and no doubt will add superior visibility to the rear of your bike. Designed with the rider in mind. High visibility features such as Dynamic Brake lights that flash rapidly when your brakes are applied and Dynamic Sequential turn signals sets your Gold Wing apart from stock models. When brakes are applied the Ultra Bright Dynamic LEDs activate in a rapid fire sequence which instantly alerts drivers behind you to respond quicker than they normally would...

    Fits:

    GL1800 UP TO 2018

    Installation:

  • Cowl Light...

    €318.00

    Cowl Light w/Sequential LED Turn Signal

    GL1800 18-19 Cowl DRL Light w/Sequential LED Turn Signal (Requires G184XP Plug N Play cable harness)

    Fits:

    GL1800 UP TO 2018

    Installation:

  • MULTI-FUNCTION FOG...

    €585.00

    MULTI-FUNCTION FOG LIGHT KIT W/DRL + ENHANCED STROBE LED

    This premium lighting kit exceeds OEM features and no other design comes close. The perfect addition to your new Gold Wing which will not only compliment the new head light design, this light will add some serious lighting. Designed from the ground up, our engineers use advanced projector optics which produces a clean beam pattern down the road and not scattered light, DOT COMPLIANT. This kit has 3 different lighting features and can be activated via the on/off switch on control panel. Mode A: Super Bright Mode - Fog Lights + DRL (Daytime Running Lights) Mode B: DRL (Daytime Running Lights) Enhanced LED Strobe Mode: For parade and show purposes...

    FIts:

    GL1800 UP TO 2018

    Installation:

  • HIGH MOUNT MULTI...

    €248.00

    HIGH MOUNT MULTI FUNCTION LED BRAKE RUNNING LIGHT

    This product integrates with the Chrome Trunk Rack and no doubt will add superior visibility to the rear of your bike. Designed with the rider in mind. High visibility features such as Dynamic Brake lights that flash rapidly when your brakes are applied and Dynamic Sequential turn signals sets your Gold Wing apart from stock models. When brakes are applied the Ultra Bright Dynamic LEDs activate in a rapid fire sequence which instantly alerts drivers behind you to respond quicker than they normally would...

    Fits:

    GL1800 UP TO 2018

    Installation:

  • PLUG N PLAY CABLE HARNESS

    €85.00

    PLUG N PLAY CABLE HARNESS

    Plug N Play wiring harness connects up to 4 different PathfinderLED front or rear lights. Easily installs PATHFINDERLED (2018+) accessories to factory Honda connection without any wire modifications and will not void factory warranty. All connectors are plug n play using OEM style connectors for a secure fit.

    Fits:

    GL1800 UO TO 2018

    Installation:

  • Provides airflow to...

    €377.00

    Provides airflow to your calipers for cooling.

    Minimizes brake dust buildup. Built-in LED position lights with on/off switch. Injection-molded ABS construction. Adds custom styling to your motorcycle. OEM style fit and finish. Plug ‘N Play installation(Requires G184XP Plug N Play Cable Harness).

    Fits:

    GL1800 UP TO 2018

    Installation:

  • Rear-view mirror with LED

    €169.00

    Rear-view mirror with LED

    Available in chrome (like the original) or bluish.

    Increases your overall visibility and strengthens your security, the must : it's elegant!

    Easier to set up than the old version, the mirrors are now complete.

    Fits:

    GL1800 UP TO 2018

    Installation:

  • ACCESSORY SOCKET

    €14.00

    ACCESSORY SOCKET

    This Accessory Socket plugs in easily to on-bike accessory harness allowing easy use of GPS Units, Radar Detector, Cell Phone Charges, etc. Drilling required during installation. Plugs into existing wire harness, no splicing required.

    Fits:

    All models

    Installation:

  • 2-PORT USB ACCESSORY...

    €30.00

    2-PORT USB ACCESSORY SOCKET

    This Auxiliary Socket has two- 2.1 amp USB power plugs for use in charging MP3, GPS, iPhones and other devices. Wire harness to Plug ‘N Go on GL1800 or use the universal splice connections to wire into any 12 volt system.

    Fits:

    All models.

    Installation:

  • UNIVERSAL TRAILER...

    €130.00

    UNIVERSAL TRAILER HITCH RACK

    Big Bike Parts® lets you take more on your ride without your trailer. The all new Universal Trailer Hitch Rack offers generous 16” x 10 ½” platform that can accommodate coolers, extra luggage, bags and more. Its 1 ½” high tubular frame is deep enough to secure your load and give you piece of mind while riding. A simple mounting bracket design uses your hitch ball as its mounting bolt with a custom designed washer that prevents movement once securely tightened. Works withmost receivers up to 3” wide and fits balls with up to a ¾” shank. As it mounts to the receiver ball mount, it fits with both horizontal and vertical receiver hitch assemblies...

    Fits:

    ALL GOLGWING with rack

    Installation:

  • TOUR RACK RISERS

    €25.00

    TOUR RACK RISERS

    Big Bike Parts® now offers its Rack Risers in black satin for all those matte black racks being mounted. Our Black Satin Rack Risers provide more clearance under your luggage rack allowing for easier cleaning or getting all your other accessories to fit underneath. Universally fits ½’’ diameter round legged racks with custom recessed bevel to securely fit and extend your original rack legs 5/8’’ taller. Comes as 4 set kit with two sets of bolts; 4x6 mm (M6) and ¼- 20 bolts to replace the shorter bolts that come with most racks.

    Fits:

    GL1500

    GL1800 2001/2020

    Installation:

  • TRAILER HARNESS GL1800...

    €109.00

    TRAILER HARNESS GL1800 2018

    Big Bike Parts® has taken its popular Show Chrome Accessories® electronically isolated trailer wiring harness to the 2018 GL1800 Goldwing. With OEM matching connectors an easy install is accomplished with this Plug ‘N Go trailer harness. This 5 wire system is ready to go except for your trailer connector of choice. Plenty of zip ties will keep it secure and off the ground. Comes with complete instructions.

    Fits:

    GL1800 UP TO 2018

    Installation:

  • VERTICAL RECEIVER...

    €349.00

    VERTICAL RECEIVER HITCH GL1800

    Big Bike Parts® is already delivering its all new receiver hitch for the 2018 Honda Goldwing. This vertical receiver design allows a clean look and is almost invisible when the receiver is not in use. This classic 1¼” receiver hitch mounts directly to the bike’s frame and sub frame with provided high strength bolts for a secure fitment. Includes Big Bike Parts® standard anti-chatter bolt design to remove excess movement, improving pulling smoothness and trailer tracking. Includes instructions and all required hardware and can be mounted without removal of the rear tire. Comes with 1 7/8” hitch ball. Fits all models of 2018 Honda Goldwing. Made in USA.

    Fits:

    GL1800 UP TO 2018

    Installation:

  • AMBER LED MARKER LIGHT...

    €134.00

    AMBER LED MARKER LIGHT SET

    Increase being seen and safer with Big Bike Parts® latest Dual Function Marker Lights for the 2018 GL1800 Goldwing. These truly outstanding LED Marker Lights replace the OEM reflectors with a pair of today’s brightest 24 SMD LED’s. Available in either Red or Amber LED’s with clear lenses to match the front mirror turnsignals for a coordinated OEM look. The LED assemblies are sealed for all weather protection and come with embedded bolt, locking pin and double sided tape to insure a secure fit. Includes full instructions and all required t-taps and spade connectors for a convenient install. Reflective backer used around LED’s to maximize candle output. Sold as a pair. High recommend BBP # 52-942 Isolation Block.

    Fits:

    GL1800 UP TO2018

    Installation: