Parite avant

Active filters

  • LED Amber Lighted Gold...

    €88.00

    LED Amber Lighted Gold or chrome Eagle Emblem.

    This unique modern looking gold tone eagle has 14 super bright amber LED lights and works as a running and turnsignal light. The eagle has a slight curve to fit on many surfaces such as the windshield panel or trunk and uses self-adhesive tape to mount. Measures 7 inches x 2 inches. Single.

    Fits:

    Gold WIng All Models.

    Inqtallation:

  • Chrome Windshield...

    €65.00

    Chrome Windshield Strut Covers.

    These Windshield Strut Covers are a great addition to the look of your bike. They are a chrome plated ABS plastic and will quickly give your bike a custom look.

    FIts:

    GL1800 2018/2021

    Intallation:

  • Trunk/Saddlebag Carpet...

    €59.90

    Trunk/Saddlebag Carpet Set.

    This carpet set is custom shaped to fit the NEW 2018-19 GL1800 Gold Wing. This is a four piece set for the trunk, right saddlebag and left saddlebag with or without the amp installed. This set helps protect the bottom of the trunk and saddlebags.

    Fits:

    GL1800 2018 to 2020

    Installation:

  • LED Mirror Lights...

    €380.00

    LED Mirror Lights w/DRL & Sequential Turn Signal.

    LED Mirror Lights w/DRL & Sequential Turn Signal. Bright LED white running light that turn to an amber sequential directional when activated.

    Fits:

    GL1800 2018/2021

    Installation:

  • Cowl Light...

    €318.00

    Cowl Light w/Sequential LED Turn Signal

    GL1800 18-19 Cowl DRL Light w/Sequential LED Turn Signal (Requires G184XP Plug N Play cable harness)

    Fits:

    GL1800 UP TO 2018

    Installation:

  • MULTI-FUNCTION FOG...

    €585.00

    MULTI-FUNCTION FOG LIGHT KIT W/DRL + ENHANCED STROBE LED

    This premium lighting kit exceeds OEM features and no other design comes close. The perfect addition to your new Gold Wing which will not only compliment the new head light design, this light will add some serious lighting. Designed from the ground up, our engineers use advanced projector optics which produces a clean beam pattern down the road and not scattered light, DOT COMPLIANT. This kit has 3 different lighting features and can be activated via the on/off switch on control panel. Mode A: Super Bright Mode - Fog Lights + DRL (Daytime Running Lights) Mode B: DRL (Daytime Running Lights) Enhanced LED Strobe Mode: For parade and show purposes...

    FIts:

    GL1800 UP TO 2018

    Installation:

  • PLUG N PLAY CABLE HARNESS

    €85.00

    PLUG N PLAY CABLE HARNESS

    Plug N Play wiring harness connects up to 4 different PathfinderLED front or rear lights. Easily installs PATHFINDERLED (2018+) accessories to factory Honda connection without any wire modifications and will not void factory warranty. All connectors are plug n play using OEM style connectors for a secure fit.

    Fits:

    GL1800 UO TO 2018

    Installation:

  • Provides airflow to...

    €377.00

    Provides airflow to your calipers for cooling.

    Minimizes brake dust buildup. Built-in LED position lights with on/off switch. Injection-molded ABS construction. Adds custom styling to your motorcycle. OEM style fit and finish. Plug ‘N Play installation(Requires G184XP Plug N Play Cable Harness).

    Fits:

    GL1800 UP TO 2018

    Installation:

  • Rear-view mirror with LED

    €169.00

    Rear-view mirror with LED

    Available in chrome (like the original) or bluish.

    Increases your overall visibility and strengthens your security, the must : it's elegant!

    Easier to set up than the old version, the mirrors are now complete.

    Fits:

    GL1800 UP TO 2018

    Installation:

  • 2-PORT USB ACCESSORY...

    €30.00

    2-PORT USB ACCESSORY SOCKET

    This Auxiliary Socket has two- 2.1 amp USB power plugs for use in charging MP3, GPS, iPhones and other devices. Wire harness to Plug ‘N Go on GL1800 or use the universal splice connections to wire into any 12 volt system.

    Fits:

    All models.

    Installation:

  • AMBER LED MARKER LIGHT...

    €134.00

    AMBER LED MARKER LIGHT SET

    Increase being seen and safer with Big Bike Parts® latest Dual Function Marker Lights for the 2018 GL1800 Goldwing. These truly outstanding LED Marker Lights replace the OEM reflectors with a pair of today’s brightest 24 SMD LED’s. Available in either Red or Amber LED’s with clear lenses to match the front mirror turnsignals for a coordinated OEM look. The LED assemblies are sealed for all weather protection and come with embedded bolt, locking pin and double sided tape to insure a secure fit. Includes full instructions and all required t-taps and spade connectors for a convenient install. Reflective backer used around LED’s to maximize candle output. Sold as a pair. High recommend BBP # 52-942 Isolation Block.

    Fits:

    GL1800 UP TO2018

    Installation:

  • LED FOG LIGHTS GL1800...

    €435.00

    LED FOG LIGHTS GL1800 2018

    A true and effective fog light disperses their beam low, wide and far to allow increased visibility and safety in rain and fog. Big Bike Parts® delivers with their latest Fog Lights for the new 2018 Goldwing. Rubber isolation bushings provide a stable, vibration free light just like the OEM. While they might look similar to the OEM, the LED’s are brighter and the bezel has been designed from scratch to provide a wider and longer photometric for a safer ride. Includes OEM style matching switch and full Plug ‘N Go wire harness. As with OEM, vertical adjustment is available for proper positioning.

    Fits:

    GL1800 UP TO 2018

    Installation:

  • LAMPGARD GL1800 - 2018...

    €59.00

    LAMPGARD GL1800 - 2018 NEWER

    With 25 years of experience with their LampGard™ Headlight protectors, Big Bike Parts® adds the 2018 Goldwing to its touring fitments. With headlights getting more sophisticated, the new Goldwing is no exception and the replacement on a cracked assembly could set you back $1,500 or more. Protect it with a hard Acrylic LampGard™ that attaches with custom hook and loop fasteners for ease of cleaning and impact absorption. Sold as pair and with custom high heat adhesive on the attached hook and loop, they will not slide, move or come loose.

    Fits:

    GL1800 UP TO 2018

    Installation:

  • ENGINE GUARD OPENING TRIM

    €34.00

    ENGINE GUARD OPENING TRIM

    This black polypropylene trim finishes the opening when you remove the OEM Engine Guard Cover. Ideal when mounting Highway Boards that attach to the case guard such as Show Chrome Accessories 21-353 and 21-354 Highway Boards and mounts. Sold as pair. Easily snaps into place once black engine guard cover is removed, providing a true finished look when using the case guard for mounting.

    Fits:

    GL1800 UP TO 2018

    Installation:

  • UPPER WIND DEFLECTOR KIT

    €159.00

    UPPER WIND DEFLECTOR KIT

    A true motorcycle accessory not only must do what it was designed to do, but it needs to look good while doing it. The old adage Form Follows Function, is a constant design practice at Big Bike Parts®, and this cannot be more evident than in their most recent Wind Deflectors for the GL1800. A true Wind Deflector will deflect as much weather away from the rider pocket as possible while still allowing the ability to bring air into the riding pocket at various angles for comfort. These Show Chrome Accessories® Upper and Lower Wind Deflectors do all of this very well...

    Fits:

    FL1800 UP  TO 2018

    Installation:

  • LOWER WIND DEFLECTOR KIT

    €159.00

    LOWER WIND DEFLECTOR KIT

    A true motorcycle accessory not only must do what it was designed to do, but it needs to look good while doing it. The old adage Form Follows Function, is a constant design practice at Big Bike Parts®, and this cannot be more evident than in their most recent Wind Deflectors for the GL1800. A true Wind Deflector will deflect as much weather away from the rider pocket as possible while still allowing the ability to bring air into the riding pocket at various angles for comfort. These Show Chrome Accessories® Upper and Lower Wind Deflectors do all of this very well...

    Fits:

    GL 1800 UP TO 2018

    Installation:

  • BRAKE SWITCH BLOCK -...

    €90.00

    BRAKE SWITCH BLOCK - ILLUM

    Show Chrome Accessories® now offers a Brake Switch Block for the GL1800 2018 and newer Goldwings. This satin black LED switch block assembly incorporates two rocker style switches with blue LED’s in each switch indicating when an accessory is active. Easily control auxiliary driving lights or marker lights. Mounts on the brake side master cylinder of the bike.

    Fits:

    GL1800 UP TO 2018

    Installation:

  • FRONT FENDER EXTENSION...

    €49.00

    FRONT FENDER EXTENSION BLACK

    This Show Chrome Accessories® Front Fender Extension adds 6 ½” to the length of the 2018 Goldwing fender. The added length greatly reduces the amount of road debris kicking into the lower cowl and all its associated dirt, helping keep the Goldwing clean. Made from polypropylene to match the OEM fender. Mounts securely with double sided tape and 2 custom mounting screws with blind nuts for a secure fit.

    Fits:

    GL1800 UP TO 2018

    Installation:

  • GT TOUR COWL LIGHT

    €270.00

    GT TOUR COWL LIGHT

    Research has shown that adding additional functions such as daytime running lights and turnsignals to the new GL1800 fog light only takes away from the light envelope and function of the fog light. So Show Chrome Accessories® has created a special GT Tour Cowl Light that actually enhances your safety and visibility while working with not only OEM but Show Chrome Accessories® own 52-924 Fog Lights. This GT Tour Cowl Light set mounts to the corners of the lower cowl bringing unprecedented daytime running lights to the front as well as benefiting as a cornering light...

    Fits:

    GL1800 UP TO 2018

    Installation:

  • FRONT FENDER TIP ACCENT

    €48.00

    FRONT FENDER TIP ACCENT

    Show Chrome Accessories® now offers a Front Fender Tip Accent in either bright chrome or satin black for the GL1800 2018 and newer Goldwings. This Front Fender Tip Accent complements the bikes front fender while accenting the bikes clean look. The no drill installation is easy utilizing 3M, high strength, long lasting double sided tape.

    Fits:

    Gl1800 UP TO 2018

    Installation:

  • FRONT FENDER SIDE ACCENTS

    €44.00

    FRONT FENDER SIDE ACCENTS

    Show Chrome Accessories® now offers Front Fender Side Accents for the GL1800 2018 and newer Goldwings. The Front Fender Side Accents complement the bikes front fender while offering a clean look without overpowering the bikes color. These accents make a great addition to any 2018 and newer Honda Goldwing and Goldwing Tour Models. They are offered in either chrome or satin black. The no drill installation is quick and easy utilizing 3M, high strength, long lasting double sided tape.

    Fits:

    GL1800 UP TO 2018

    Installation:

  • GT CALIPER COVER

    €220.00

    GT CALIPER COVER

    Big Bike Parts® GT Caliper Covers mount over the front brake calipers providing a true custom caliper cover. The increased aerodynamics around the brakes can minimize the spread of brake dust. Mounts to existing OEM bolt locations with new mounts and hardware. These GT Caliper Covers provide full coverage of the brake calipers and provide a great look with their scoop design and vents. For 2018 and newer GL1800 Goldwings. Available in black and chrome.

    Fits:

    GL1800 UP TO 2018

    Installation:

  • FRONT FENDER VENT ACCENT

    €59.00

    FRONT FENDER VENT ACCENT

    Show Chrome Accessories® has designed a great pair of vent fillers for the front fender of the 2018 and newer Gold Wing. These vent fillers help dress up the front fender and will fit all models. The accents fit the OEM openings and are secured with Show Chrome Accessories® tried and proven double sided tape for long term adhering. Available in Chrome or Black Satin Finish.

    Fits:

    GL1800 UP TO 2018

    Installation:

  • Omni Levers

    €110.00

    Omni Levers

    Trust us; Omni Levers feel as good as they look. The ergonomic design is precisely contoured and angled to deliver comfortable, controlled actuation of the clutch or front brake.

    Sleek, angular design to complement the lines of the bike

    Ergonomic feel for comfortable, effortless pullback

    Does NOT retain adjustability of the OEM levers

    Made from quality aluminum offered in chrome or satin black

    Fits:

    GL1800 UP TO 2018

    Installation:

  • Omni Grips

    €115.00

    Omni Grips

    Omni Grips for Gold Wing feature a clamshell design that easily installs over the factory grips to retain full OEM heat functionality but offer a significant upgrade in style.

    Aluminum housings with premium EPDM rubber for grip and vibration dampening

    Wide-style grip provides comfort and relieves hand fatigue

    Two-piece clamshell design does not require removal of OEM grips

    Angular cutouts with form-fitted rubber inserts match the lines of the bike

    Styled to match the complete line of Omni products for 2018-later Gold Wing

    Fits:

    GL 1800 UP TO 2018

    Installation: