GL1500

TEARDROP M.C. COVERS

Add a little chrome to your bike with Show Chrome Accessories Teardrop Master Cylinder covers. Aluminum die cast cylinder cover in teardrop design is a perfect extra to the handlebar area. Comes as a pair, fits Honda GL1500, GL1800 2001-17, Valkyrie, VTX1800, VT1100 1987-96, VT1300 Fury/Interstate/Stateline/Sabre, Yamaha Royal Stars.

Fits:

GL1500 1988/2001 GL1800 2001/2017

Installation:

Pathfinder LED High Performance Bulb.

Replace the 7443 bulb with the Pathfinder LED High Performance Bulb used for any 7443 applications. Popular on Goldwing/F6B for running, saddlebag and brake light LED upgrades. Instant intensity. 500LM. Red. Plug N' Play. By SoCalMotoGear. Note: There is no LED Flasher or Load Equalizer necessary when changing just your running/brake lights.

Fits:

GL1500- GL1800 2001-2017

Installation:

Clutch or Brake Perch Mount

Perfect for iPhone®! Easily mount and secure an iPhone®, iPod®, smartphone, GPS or small device to your clutch or brake perch in just seconds. An adjustable swivel head allows movement for perfect positioning and disconnects in seconds! Each system includes a device holder of your choosing and Standard Accessory Mount. Standard Cradle holds devices measuring 1-5/8" to 3-5/8" wide. Large Cradle holds devices measuring 3-5/8" to 6" wide.

Fits:

All models.

Installation:

 Rear Pouch Door Accents.

Tri-chromed accents add a finishing touch on the rear door pouches and the contrast chrome on black make them stand out. Easy to install with self-adhesive tape, they fit over the rear door latch. Measures 1 inch x 2 inch.

Fits:

GL1800 2001/2017.

Installation:

USB power source Black

Two USB ports (bottom = 1.0A and top = 2.1A) provide enough output for charging any modern device, including tablets. Mount anywhere you choose including inside your tour trunk, on the dash, or on your handlebars.

Fits:

All models.

Installation:

Driver Pegs

Kuryakyn ISO-Wings and Dually ISO-Pegs assembled with the with required adapters for Gold Wings and Valkyries. These classy, comfortable pegs can be installed in minutes.

Fits:

GL1500-GL1800 UP TO 2001.

Installation:

Usb power source

Two USB ports (bottom = 1.0A and top = 2.1A) provide enough output for charging any modern device, including tablets. Mount anywhere you choose including inside your tour trunk, on the dash, or on your handlebars.

Fits:

All models.

Installation:

Blue rear speaker lights.

The speaker light contains 2 LED lights encased in a clear durable plastic light ring which give off a gentle halo glow and are visible in daylight while not being overpowering in darkness. The rings measure 4 inch in diameter. There is no interference with the speaker operation. This unique lighting adds additional visibility to the bike and looks great. Included is an optional 5 inch gasket so this light can be used on a 5 inch speaker. Fits the GL1800 01-12 and GL1500. Four colors available. Pair.

Fits:

GL1500.

GL1800 2001/2010.

Installation:

Beverage Carrier Universal Drink Holders

Our most popular option to accommodate virtually any drink! Easy on, easy off snap design PVC leather Beverage Carrier easily holds most cups, cans or bottles, and is collapsible for storage. Additionally, the quick-detach thumbscrew mount leaves a simple clamp when not in use. Drink Ring has 3" inside diameter.

Fits:

All models.

Installation:

Electrical Power Point

Keep your cell phone, GPS, air pump or any other electrical device charged while on the road. Built into our Silver Bullet light housing and comes with cigarette lighter and everything you need to connect directly to your battery with a quick disconnect. Mount it above your handlebars or check for tank clearance and mount it below.

Fits:

All models

Installation:

Stainless Steel Mug Drink Holders

Whether sipping on hot or cold beverages, the insulated Stainless Mug & Drink Holder maintains your desired temperature for hours! The drink holder easily mounts on handlebars or clutch/brake perch mounts, and the quick-detach thumb screw offers easy removal when not in use.

Installation:

Brake Pedal Pad

Covers the raw, unfinished end of your brake pedal. Beautiful chrome with rubber inserts for a non-slip surface.

Fits:

GL1500 1988/2001

Installation:

UNIVERSAL TRAILER HITCH RACK

Big Bike Parts® lets you take more on your ride without your trailer. The all new Universal Trailer Hitch Rack offers generous 16” x 10 ½” platform that can accommodate coolers, extra luggage, bags and more. Its 1 ½” high tubular frame is deep enough to secure your load and give you piece of mind while riding. A simple mounting bracket design uses your hitch ball as its mounting bolt with a custom designed washer that prevents movement once securely tightened. Works withmost receivers up to 3” wide and fits balls with up to a ¾” shank. As it mounts to the receiver ball mount, it fits with both horizontal and vertical receiver hitch assemblies...

Fits:

ALL GOLGWING with rack

Installation:

Magnum quick

clamp All clamps have a 1/2" hole for clamp bolt/clevis mount, stainless steel construction for superior strength, and hinged construction for fast, simple installation. No more stripped bolt heads common of 3-piece designs.

Installation:

Mesh Basket Universal Drink Holders

Mesh basket features "fingers" to firmly grasp onto various-sized containers to keep your drink in the holder and not on you! Quick-detach thumbscrew mount leaves a simple clamp when not in use.

Installation:

TOUR RACK RISERS

Big Bike Parts® now offers its Rack Risers in black satin for all those matte black racks being mounted. Our Black Satin Rack Risers provide more clearance under your luggage rack allowing for easier cleaning or getting all your other accessories to fit underneath. Universally fits ½’’ diameter round legged racks with custom recessed bevel to securely fit and extend your original rack legs 5/8’’ taller. Comes as 4 set kit with two sets of bolts; 4x6 mm (M6) and ¼- 20 bolts to replace the shorter bolts that come with most racks.

Fits:

GL1500

GL1800 2001/2020

Installation:

BIG ASS™ DRINK HOLDER(NO MOUNT)

• The Ciro® Big Ass™ Drink Holder is the perfect way to bring that 30 oz. tumbler on the road with you.

• The durable neoprene rubber molded net is designed to securely grip your cup so there’s no worry of losing it.

• The rubber is also weatherproof and won’t deteriorate in the sun or elements you encounter on the road. 

• Designed to work with 30 oz. tumblers and other large bottles and cups.

• Made from durable neoprene rubber to grip and last.

• Mounts quickly to Ciro’s line of ball mounts.

• Features a 4-1/8” diameter opening.

• no mount.

Fits: 

Fits any Ciro ball mount.

Instalation:

Multi-Rack Adjustable Trunk Luggage Rack

Designed to fit virtually any tour trunk thanks to the ingenious adjustable mounting stand-offs, this luggage rack can conform to any trunk lid whether flat or curved. Features include a 1/2" tubular design that allows the use of any common flag holder if desired, as well as handy built-in corner loops to keep your luggage secure. Also included in the kit, a pair of mounting extensions for trunk lids with a steep downward rear swoop or with a trunk lid spoiler installed.

Dims: 21"W x 12"L

Fits:

GL1500

GL1800 2001/2021

All models

Installation: