GOLDWING TOURING DCT

VERTICAL RECEIVER HITCH

This vertical receiver design allows a clean look and is almost invisible when the receiver is not in use.

This classic 1¼” receiver hitch mounts directly to the bike’s frame and sub frame with provided high strength bolts for a secure fitment.

Includes Big Bike Parts standard anti-chatter bolt design to remove excess movement, improving pulling smoothness and trailer tracking.

Includes instructions and all required hardware and can be mounted without removal of the rear tire. Comes with 1 7/8” hitch ball. Fits all models of 2018 Honda 

Made in USA

Compatible :

GL1800 Touring from 2018 and up

Installation :

J&M ROKKER® XXRP 400w 4-CH DSP Programmable Amplifier kit for 2018-2023 Honda® GoldWing Tour/Std.

Output Power:

400w RMS Total - 100w x 4CH -- 2 or 3 ohm load

Amplifier Class:

Class D -- Properly Shielded No FM/AM Radio Interference

Power Supply:

12v Digital Switching -- Low Amperage Draw Compared to Other Brands in this Power Range

DSP Programmable:

Amplifier Internal Settings Fully Programmable thru the Internal Digital Signal Processor with Downloadable APP

External Dimensions:

Length 8.250" -- Width 5.125" -- Height 1.625"

Fits:

GL1800 2018/20223

Installation:

Deluxe trunk luggage rack chrome or black

This large luggage rack was designed with the Honda Valkyrie Interstate in mind but fits perfectly on the Honda GL1800 Gold Wing as well as the GL1500 Gold Wing.

The manufacturer's trunk specs should be referenced for loading limits.

Dimension are 24"L x 13"W x 7 1/2"H.

The hardware comes with tapered stainless steel spacers that allow the rack to easily conform to the curve of almost any trunk.

These specially designed washers are recessed to allow the rack feet to sit into the spacer spreading the load over the trunk lid more equally.

Rubber washers assure a water tight fit to the trunk lid.

Works with OEM spoiler.

Fits:

GL1500 1987-2001

GL1800 2001-2020

BMW K16

Installation:

LED Logo Surrounds

The LED logo surround enhances the brand and increases lateral visibility.

Soft illumination dims and flashes amber when you activate your turn signals.

This fits under all Honda emblems placed on plastic fairings (not suitable for steel tanks for example)

The installation requires a connection that we will indicate to you according to the models.

Sold in pairs.

Models:

GL1800 2001-2022

Instalation:

Chrome radiator grille with LED

The TWINART LED Lighted Radiator Grill Panels offer bright LEDs that reflect and transform the radiator area into something you won't be able to take your eyes off of. Packed with a total of 40 bright white LEDs as well as 40 amber turn signal LEDs, this TWINART part draws attention from all angles. These feature run and turn lights and are back by a limited lifetime warranty against LED failure. Lights body are chrome, grill paneling is available in chrome or black.

use the 48000 Plug-N-Play

Fits:

GL1800 2018/2022

Installation:

Chrome rear brake master cylinder cover.

A small cover to brighten up the central part, a touch of chrome to embellish its GOLDWING.

Very easy to install and maintain.

Fits:

Gl1800 2018/2022

Installation:

Chrome brake master cylinder cover.

A small cover to brighten up its handlebars, a touch of chrome to embellish its GOLDWING.

Very easy to install and maintain.

Fits:

GL1800 2018/2022

Installation:

MANUAL CONTROLLER

This manual encoder will be necessary when you purchase the Shock & Awe® LED Strips (P/N 40056) and Engine Lighting Panels (P/N 40055) if you do not have an existing Shock & Awe® lighting set on your motorcycle.

Fits:

GL1800 2018/2022

Installation:

SHOCK & AWE® 2.0, CONTROLLER KIT

Unique 3 channel function allows there to be separate zones. Upgrade your Shock & Awe 1.0 to have the new speed function, music mode, and brake mode with this controller. Bluetooth controller is compatible with all Ciro Shock & Awe 2.0 (Including Shock & Awe 1.0)

Fits:

GL1800 2018/2022

Installation:

SHOCK & AWE® 2.0, 12" LED FLEX STRIPS

12" accessory LED Flex Strips to add more lights to your SHOCK & AWE 2.0 LED kit.

Two 12" LED Flex Strips that plug into Ciro SHOCK & AWE 2.0 LED kit.

Fits:

GL1800 2018/2022

Installation:

Shock & Awe® extension kit.

Shock & Awe® 2.0 dedicated expansion kit to put wherever you want.

Works in addition to the basic kit (C48031) or with a controller. (Manual controller (C41035) or Bluetooth controller (C42000)

12V system and Plug & Play.

2 light strip of 12 LEDs of 12 in.

2 wire extensions of 22 in.

2 Y dividers of 8 in.

Fits:

GL1800 2018/2022

Installation:

Shock & Awe® LED strips.

This is an additional kit for the Shock & Awe® LED kit (C48031).

Designed for mounting on your cylinder head lights, they can also go anywhere else.

Length : 9,8 in

Width : 0.2 in

Wire length: 48 in

The strips must be mounted with the basic Shock & Awe® LED kit or at least with a controller. (the manual C4200 or the Bluetooth C41035)

Fits:

GL1800  2018/2021

Installation:

J&M ROKKER® XXR 5.17” Fairing or Rear Speaker Upgrade Kit for 2018-2021 Honda® GoldWing.

Speaker Size:5.17” (in.) Diameter Frequency Response:35-18kHz Sensitivity:90 db Magnet Material:Lightweight Neodymium Impedance:3.5 Ohms Maximum Power:290 Watts RMS Power:200 Watts Cone Construction:Black Polycarbonate Mounting Depth:1 15/16” (in.) Weather Resistant:Yes OEM Size Match:Yes Quantity Per Package:2 Speakers - (1 pair)

Fits:

GL1800 2018/2022

Installation:

J&M ROKKER® XXRP 800w 4-CH DSP Programmable Amplifier kit for 2018-2021 Honda® GoldWing Tour/Std.

Output Power:

800w RMS Total - 200w x 4CH -- 2 or 4 ohm load

Amplifier Class:

Class D -- Properly Shielded No FM/AM Radio Interference

Power Supply:

12v Digital Switching -- Low Amperage Draw Compared to Other Brands in this Power Range

DSP Programmable:

Amplifier Internal Settings Fully Programmable thru the Internal Digital Signal Processor with Downloadable APP

External Dimensions:

Length 8.250" -- Width 5.125" -- Height 1.625"

Fits:

GL1800 2018/2022

Installation:

Gold Flying Eagle w/USA Flag.

This emblem has a gold flying eagle over two USA flags . Fits on any flat surface and uses self-adhesive tape to mount. Measures 3 inches x 1 ¾ inches. Single.

Fits:

All models

Installation:

Gold Flying Eagle w/USA Flag.

This very popular emblem has a gold flying eagle over two USA flags. Fits on any flat surface and uses self-adhesive tape to mount. Measures 4 ¼ inches x 2 ¾ inches. Single.

Fist:

All bikes.

Installation:

CanAm Chrome Decal w/Black Eagle

The chrome round disc measures 2 ¾ inches in diameter and is embossed with a black eagle. Uses self adhesive tape to mount on any flat surface and is a perfect fit for the front or rear on the Can Am®. Single.

Intallation:

Eagle Trim Emblems.

Chrome ABS eagle emblem is an attractive accent which has an eagle head and wing design measuring 7 inches in length The eagle is made with a light curve allowing it fit in a variety of places on many bikes, trikes or trailers. Easy to install with self-adhesive tape. Measure 7 inches long.

Fits:

All models.

Installation:

LED Amber Lighted Gold or chrome Eagle Emblem.

This unique modern looking gold tone eagle has 14 super bright amber LED lights and works as a running and turnsignal light. The eagle has a slight curve to fit on many surfaces such as the windshield panel or trunk and uses self-adhesive tape to mount. Measures 7 inches x 2 inches. Single.

Fits:

Gold WIng All Models.

Inqtallation:

Chrome Windshield Strut Covers.

These Windshield Strut Covers are a great addition to the look of your bike. They are a chrome plated ABS plastic and will quickly give your bike a custom look.

FIts:

GL1800 2018/2021

Intallation:

Eagle Emblem.

Updated flying eagle emblem with self adhesive tape. Remove protective film to reveal the beautiful gold tone. Measures 1 3/4 inches x 1/2 inch.

Fits:

All models.

Installation:

Gold Wing w/USA Shield

This emblem has gold wings with a USA shield in the center. Fits any flat surface. Measures 3 inches x ⅞ inch. Single.

Fits:

All models

Installation:

Catalog  1800 Trunk Half Lid Pouch with Reflectors.

This black trunk lid pouch fits into the trunk lid and allows for more trunk storage and quick to reach items. Our slim line design allows more room up into the lid for items like helmets. Velcro closures are on all pockets. We have included reflective tape for added safety when stopped on the side of a road. Mounts into existing hardware.

Fits:

The GL1800

Bagger with origine trunk

Installation:

Trunk/Saddlebag Carpet Set.

This carpet set is custom shaped to fit the NEW 2018-19 GL1800 Gold Wing. This is a four piece set for the trunk, right saddlebag and left saddlebag with or without the amp installed. This set helps protect the bottom of the trunk and saddlebags.

Fits:

GL1800 2018 to 2020

Installation:

Central Taillight Trim w/Red Lens Running & Brake Light.

Central Taillight Trim w/Red Lens Running & Brake Light. Ride safer by adding more visibility with this bright LED running and brake light. Replaces Saddlebag Rear Center Cover.

Fits:

GL1800 2018/2021

Installation: