Accessoires

TURNSIGNAL MIRROR LIGHT

Big Bike Parts has brought their popular smoked-lense look forward to the turn signals. Smoke OEM styled lenses match their trunk and saddlebag lights and provide the distinctive look. This pair of turn signal assemblies replaces the OEM ones while using the OEM wire harness.

Fits:

GL1800 2001/2017

Installation:

NAVI PANEL ACCENT

This chromed stamped steel accent dresses up the right side control area. Attaches with double sided tape provided. Fits Honda GL1800 with Navigation System 2006-2017

Fits:

GL1800 2006/2017

Installation:

KEY ACCENT W/ RUBBER

These Chrome Key Accents beautifully accent your GL1800 key ignition panel with a touch of chrome. Chrome Key Accents replace OEM accents and feature a rubber scuff pad to resist scratching. Accents easily snap into place with self-locking tabs. Not recommended for International models that incorporate HISS anti-theft chip in key.

Fits:

GL1800 2001/2017

Installation:

CALIPER COVERS

These sleek and sporty chromed ABS Caliper Covers match the front contour of the OEM covers and offer a clean look. Mounts with hardware provided. Fits GL1800 2001-2017 non airbag.

Fits:

GL1800 2001/2017 No Airbag

Installation:

VERTICAL AIR ACCENT LED

These Vertical Air Reflectors bring a pair of 12 LED Amber lights to the otherwise non functional vertical air intake. This greatly enhances visibility and safety and can be wired as dual function running and turn signals. For the GL1800 Goldwing 2012- 2017, excluding the F6B models.

Fits:

GL1800 2012/2017

installation:

CB CONTROLLER COVER GL1800

This CB Controller Cover was specifically designed to accent the OEM CB controller contours and incorporates a high luster chrome for a superior fit and finish. Easily attaches with durable double sided tape.

Fits:

GL1800 2001/2017 and F6B

Installation:

LED LIGHT SET

This LED Molding Set comes with both Red and Clear lenses allowing for greater customization. This set features 56 LEDs for increased visibility and safety. Big Bike Parts® Plug ‘N Go installation makes setup a breeze. Fits GL1800 2001-2010.

Fits:

GL1800 2001/2010

installation:

RADIO ACCENT PANEL SMOKEG

This Chrome steel accent is designed to fit around the radio panel buttons to dress up the console area. Fits Honda GL1800 2006-2010 (airbag model), all 2012-2017 models.

Fits:

GL1800 2006-2010 Airbag and GL1800 2012/2017

Installation:

SPEAKER TRIM

This Contour Series speaker trim delivers stylish curves and a flare of elegance to enhance the classic style of the Honda GL1800 Gold Wing. These speaker accents capture the Contour Series design while molding to the curves of the existing OEM speakers. Simple installation, brilliant chrome plated ABS and seamless lines gives these speaker accents a step above the rest at a great value.

Fits:

GL1800 2001/2017

Installation:

DIE CAST EXHAUST TIPS GL1800

These die cast extensions easily replace the OEM exhaust tips with the same 3 bolt pattern. The 4-1/2" diameter extension is capped with a blind mount die cast trim, adding a true custom look to your Goldwing. Fits all GL1800 2001 through 2017 Goldwing's.

Fits:

GL1800 2001/2017

Installation:

SADDLEBAG LENS GRILLES

Use these attractive Saddlebag Lens Grilles to highlight the back of your bike. Attaches with double sided tape provided. Fits Honda GL1800 2006-2010

Fits:

GL1800 206/2010

Installation:

FRAME COVER W/ RUBBER INSERTS

An alternative to the all chrome look. This piece combines chrome and raised rubber inserts to replace the gray plastic OEM swing arm cover and all the way up the frame. Attaches with existing hardware. Fits Honda GL1800 2001-2012.

Fits:

GL1800 2001/2012

Installation:

FRONT FENDER FILLER ACCENT

These Fender Accent Fillers add the look of speed to your GL1800 Goldwing, even while standing still. These stylish accent grilles are made from ABS, with Show Chrome Accessories® quality chrome finish. While they snap in place, they are additionally secured with double sided tape. Sold as pair.

Fits:

GL1800 2012/2017

Installation:

LED HEADLIGHT END TRIM

This custom LED Trim incorporates 16 bright white LED’s enhancing daytime visibility and safety. These Chrome Headlight End Trims replace the OEM black end trims on the 2012 or the plain chrome trims on any of the 2001 through 2017.

Fits:

GL1800 2012/2017

Installation:

SADDLEBAG SCUFF PADS

These Saddlebag Scuff Pads will protect saddlebags from passenger footwear with a soft carbon fiber look. The inner piece measures 10" L x 2-1/2" W and the outer piece measures 9-1/2" L x 1-1/4" W. The pads come as a set of 4 pieces and attach with double sided tape provided. For Honda GL1800 2001-2010.

Fits:

GL1800 2001/2010

Installation:

LED WINSHIELD GARNISH

L.E.D. light unit mounts to the inside of the windshield garnish above the opening 13 amber L.E.D.s inside a plastic housing easily mounts with double sided tape Remains invisible until lit up.

Fits:

GL1800 2001-2010

Installation:

Omni driver flooboard kit.

More room equals more comfort. The Kuryakyn Omni Driver Floorboard Kit offers close to five times the surface area compared to the stock Gold Wing driver pegs and also includes matching ergonomic shift and brake levers.The sleek, streamlined floorboard design complements the GL1800's modern lines for a clean, high-end styling and comfort upgrade.

Board Dims: 10" Long x 4" Wide (widest point)

Kit includes driver floorboards, shift lever and brake lever

Durable aluminum construction with premium EPDM rubber for grip and vibration dampening

Compatible with both manual and DCT Gold Wing models

Styled to match the complete line of Kuryakyn Omni products for Gold Wing

Fits:

GL1800 DCT UP TO 2018

Installation:

LED REAR FENDER

This ABS Smoke Chrome Accent with LED’s mounts to the lower rear fender with both double sided adhesive tape and 2 button head screws to replace OEM ones. This contoured chrome LED incorporates 20 SMD LED’s configured as a dual function for both running and brake use. Custom designed beveled lens minimizes hot spots where the LED’s are displayed, resulting in a more uniform pattern. For Honda Goldwing 2012-17.

Fits:

GL1800 2012/2017

Installation:

Omni Frame Covers conceal the Gold Wing's twin-spar frame rails for a clean, fully covered look. Follows factory design cues for a seamless integration with OEM accents and body panels.

Lightweight and durable ABS construction with premium chrome plating

Matte black insert plates prevent boot scuffs on the chrome

Replaces the stock swingarm pivot cover

Easy to install reusing stock hardware/fasteners

Fits:

GL1800 UP TO 2018

Installation:

BELLY PAN GL1800 2001-17

This Belly Pan streamlines the undercarriage providing smoother air flow and less wind drag and buffeting at highway speeds. It also protects softer undercarriage parts like your coolant tank. A custom engineered perforation pattern is incorporated to increase ventilation for better airflow. Made from aircraft quality aluminum and designed in 2 pieces for easier oil filter access. Edges are softened to minimize sharp edges. Made in the USA.

Fits:

GL1800 2001/2017

Installation:

CHROME SCUFF PLATES

These Chrome Saddlebag Scuff Pads protect saddlebags from passenger footwear while providing a unique and stylish look. Chrome plated steel scuff plates come as a 4 piece set and attach with double sided tape provided. Fits Honda GL1800 2001-2010.

Fits:

GL1800 2001/2010

Installation:

Omni LED Rear Saddlebag Accents

Omni L.E.D. Rear Saddlebag Accents look right at home flowing with the outside and lower edges of the saddlebags' rear surface to add depth and intense auxiliary run-turn-brake illumination. Styled to match stock lighting components for seamless integration.

Requires Plug-&-Play Wiring Adapter, P/N 3268, sold separately

If bike is already equipped with P/N 3268 and all three outputs are used, all that is needed is Y-Connector Kit, P/N 3269, sold separately

Provides red run/brake and amber turn signal functionality

Illumination and durable polycarbonate red lenses are styled to match stock lighting components for seamless integration

Fits:

GL1800 UP 2018

Installation:

2-PORT USB ACCESSORY SOCKET

This Auxiliary Socket has two- 2.1 amp USB power plugs for use in charging MP3, GPS, iPhones and other devices. Wire harness to Plug ‘N Go on GL1800 or use the universal splice connections to wire into any 12 volt system.

Fits:

All models.

Installation:

Omni LED Side Saddlebag Inserts

Ditch the factory saddlebag reflectors for something a lot more functional. Omni L.E.D. Side Saddlebag Inserts replace the simplistic reflectors with auxiliary red run-brake and amber turn signal lighting. Choose chrome or satin black injection-molded ABS housings with red polycarbonate lenses that deliver an aesthetic upgrade when the bike's powered off.

Direct replacements for the stock side saddlebag reflectors

Provides ultra-bright red run-brake and amber turn signal functionality

Durable injection-molded ABS housings, polycarbonate lenses

Requires Kuryakyn Wiring Adapter (P/N 3268, sold separately) for plug-&-play installation

Fits:

GL1800 UP 2018

Installation: