Accessoires

Side Fairing Accents with Predator Grills.

Tri-chromed ABS accents completely cover the side fairing air intake grill giving the bike a bigger bolder chrome impact. This eye catching combination of the 4 piece chrome predator grills, Add On part 45-1629NUA, and Add On part 45-1629NUB, chrome side fairing accent, gives an additional option for covering the air intake grills. Applies with silicone and/or self-adhesive tape.

Fits:

the GL1800 2001/2010.

Installation:

Chrome front mirror trims for GL1800 01-17

This tri-chromed front mirror trim fits the outer edges of the rear view mirror adding a nice contrast with the painted mirrors. Easy to install with self-adhesive tape.

Fits:

GL1800 2001/2017 and F6B.

Installation:

Dash Door Accents.

These chrome ABS dash door accents add a great look to the bike making the dash doors really standout. The set includes a right and left chrome trim which outlines the dash doors and a chrome accent to cover the latch on the clutch side door of the bike. They are easy to install using the silicone which is included.

Fits:

GL1800 2001/2010

Installation:

Chrome grip damper for GL1800.

This chrome damper replaces the black one on the bike giving the bike an extra chrome accent which pairs up nicely with chrome grips for a classy look.

Fits:

GL1800 and F6B

Installation:

Chrome Steel Plugs ¼ "

The chrome steel plugs fit a ¼ inch screw giving the bike a finished, show bike look. 10 packs.

Fits:

All models

Installation:

Universal Accessory Lighted Switch Kit w/Chrome Plate.

This accessory kit will let you know accessories are on or off at the touch of your finger tips. Includes: wire harness, lighted switches and chrome ABS plate. Plate measures 2 ¼ inches x 2 ¼ inches and mounts using self-adhesive tape. Drilling is required for installation. Fits the GL1800 01-17, or on any flat surface.

Fits:

All models.

Installation:

Gold Flying Curved Eagle Emblem.

This is a classic gold tone flying eagle design. Fits on any slightly curved surface such as the GL1500 windshield panel. Measures 6 inches wing tip to wing tip by 2 7/8 inches widest height.

Fits:

GL1500 and All models.

Installation:

Eagle Emblem.

Updated flying eagle emblem with self adhesive tape. Remove protective film to reveal the beautiful gold tone. Measures 1 3/4 inches x 1/2 inch.

Fits:

All models.

Installation:

Gold Wing w/USA Shield

This emblem has gold wings with a USA shield in the center. Fits any flat surface. Measures 3 inches x ⅞ inch. Single.

Fits:

All models

Installation:

FORK REDIGIFIER AIRBAG

SuperBrace is the leading motorcycle fork stabilizer. Our patented brace provides better stability,superior aerodynamics and a more streamlined look than other multi-piece braces on the market.

Eliminates Fork Flex Reduces low and high speed wobbles.

Improves stability in tight cornering. Improves tire life and reduces cupping.

Decreases sensitivity to rough road surfaces and rain grooves.

Each SuperBrace is designed and manufactured for each specific motorcycle.

Fits:

GL1800 2006/2017 Airbag models

Installation:

Fog Light with Daytime Running and Turn Signal (DRTS) Lights.

SENTINEL L.E.D. All in one fog lights with integrated daytime running and turn signals have powerful LEDs to brighten up the road and produce a clean white light. They will light up a wider view of the road ahead and cut through the rain and fog like never before. The DRTS are LED lights that operate separate from the fog light. The day time running light is white and the turn signal is amber. The amber LED is activated with the left and right turn signals and emergency flashers on the bike. Installation: Plug N Play – Includes hardware,...

Fits:

Gl1800 2001/2010

Installation:

Sentinel LED Passenger Armrest Lights.

These powerful integrated lights run in three modes; red running, a brighter red brake, and a sequential amber turn signal when activated. The lights wrap around the passenger armrests to provide added safety to the rear and side of the bike. They create an attention getting bright LED that is more easily seen at eye level to approaching vehicles to help you to be seen. The stylish chrome ABS housing is beautiful and functional, reflecting the lights for more effectiveness. They easily attach with strong self adhesive tape and wire connectors for an easy integration into the bike's system. Sold in pairs.

Fits:

Gl1800 2018/2021

Installation:

H7 LED PATNFINDER

LED headlight bulbs for the GL1800 and F6B. These new improved bulbs are 3X brighter and have the new generation LED with 4000 theoretical lumens, 6000K color temperature. They are solid state LED bulbs and come as pairs. Plug and play and adapter ring comes off for easy install as easy as OEM bulbs. They have a passive cooling system that dissipates heat efficiently putting them above others on the market because there are no moving parts. The bulbs works on a 12 Volt system at 1.5 AMPs per bulb whereas stock bulbs draw 4-5 AMPs per bulb. Used as high or low beam for the GL1800 and F6B.

Fits:

GL1800 2001/2017

Installation:

Dynamic-Sequential LED Front Indicators with Day Time Running Light

Clear or smoke Lens

This fantastic light assembly replaces the standard front directional light with the latest in LED technology. This adds the ultimate light upgrade with dual functionality to your Gold Wing. The PATHFINDERLED high performance LED day time running light with its bright white LED, enables you to be seen with instant visibility. This is similar to the technology seen in modern vehicles. When the directional indicator is activated, the white running light goes off and the “Dynamic–Sequential” amber LEDs begin to run. They give a visual alert to the opposing traffic with the direction you are turning...

Fits:

GL1800 2006/2017

Intallation:

Rectangle FOG LIGHTS with INTEGRATED DAYTIME RUNNING/TURNSIGNAL SWITCHBACK LIGHTS

Rectangle Fog Lights with Integrated Daytime Running/Turnsignal lights are NEW all-in-one designed lights. These lights add powerful LEDs to brighten up the road while a separate set of LED daytime running lights, already built into the driving light, enhance the look on the motorcycle and promote better visibility on the road. With the dual switchback technology, this daytime running light (DRL) is a white running light and when activated by the turnsignal switch, changes to an amber blinking LED...

Fits:

GL1800 2012/2015

Intallation:

FM/Satellite Radio Antenna Tip.

The antenna helps to eliminate FM interference when traveling through high FM output areas. It has a fold down feature to help when stowing the bike. Measures 16 inches. Single.

Fits:

GL1800 2001 to 2017.

Installation:

Chrome Frame Cover

This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from industry-leading materials using up-to-date equipment, it ensures everlasting reliability and enduring value. This product is distinguished by total quality assurance, unsurpassed by anybody else.

Fits:

GL1800 UP TO 2018

Installation:

HANDLEBAR RISER SHIMS

These billet aluminum Handlebar Riser Shims mount between the handlebars and the forks to raise the handlebars about 1-1/2" at the grip end.

Fits:

Gl1800 2001/2017

Installation:

Chrome Trunk Rack.

This tri-chromed rack is a custom design which follows the curves of the trunk and will fit with a lighted spoiler. It has a tubular bar design and includes 2 tabs with holes for mounting flag poles or holding items onto the trunks rack with bungee cords. Measures 12 inches x 22 inches.

Fits:

GL1800 2001 to 2017.

Installation:

ENGINE SIDE COVERS CHROME

Show Chrome Accessories® has designed a pair of brilliant chrome engine side covers, highly requested for the 2018 and newer Gold Wing. These custom covers replace the small OEM left and right black pieces with a pair of full panels to cover the engine area. Each incorporates 3 rubber toe scuff inserts, to not only add style, but minimize scuffing. As with the OEM, the left side mounts with 2 bosses and the right reuses OEM screws. The left incorporates a large foam backer to absorb some sound, that is also heat resistant.

Fits:

GL1800 UP 2018.

Installation:

Lampgard Headlight Protector

This clear LampGard™ Headlight Protector is designed to cover the entire GL1800 headlight, offering superior protection against flying rocks and other road debris. Securely attaches with 3M Dual Lock™ fasteners.

Fits:

GL1800 2001/2017

Installation:

Blue rear speaker lights.

The speaker light contains 2 LED lights encased in a clear durable plastic light ring which give off a gentle halo glow and are visible in daylight while not being overpowering in darkness. The rings measure 4 inch in diameter. There is no interference with the speaker operation. This unique lighting adds additional visibility to the bike and looks great. Included is an optional 5 inch gasket so this light can be used on a 5 inch speaker. Fits the GL1800 01-12 and GL1500. Four colors available. Pair.

Fits:

GL1500.

GL1800 2001/2010.

Installation:

SWITCH BLOCK ILLUM

This switch block assembly incorporates 3 rocker style switches with bright amber LED’s. This switch block mounts on the brake side of the bike, allowing easy control of auxiliary driving, fog or marker lights on Cruisers or Gold Wings. The Switch Block Assembly fits the master cylinder for an integrated OEM look. Fits Honda GL1800/GL1500, VTX1800/VTX1300, VT1100/VT750, VF750, VLX600 and Valkyrie, Yamaha Royal Star, and Road Star.

Fits:

GL1800 2001/2017

Installation:

CNC DAMPNERS

This pair of Smoke Chrome CNC handlebar dampeners is designed to replace the OEM black ends by adding chrome while reducing the vibrations on the handlebar. These dampeners are easy to install with the screws provided to make your ride more comfortable and add chrome to your bike. Fits Honda GL1800.

Fits:

GL1800 2001/2017

Installation:

Clamps

Our chrome-plated stainless steel P-Clamps work great for mounting Kuryakyn Silver Bullets or other accessory driving lights to frame tubes or engine guards. The clamp has a 5/16" mounting hole and a hinged design that makes installation nice and easy. The clamps are secured by both a flathead screw and the fastener used to attach the accessory for incredibly secure mounting.

Installation: