List of products by brand Show Chrome

GT TOUR RACK GL1800 CHROME

This GT Tour Rack from Show Chrome Accessories® gracefully complements the natural lines of the 2018 Goldwing trunk. Its generous 22 ½” x 15” overall size will easily accommodate your favorite luggage tour bag as well as allow it to be securely fastened with its no slip corner tie down points. As with all Show Chrome Accessories® drill through racks it comes with custom recessed spacers that are tapered to allow easy matching to the trunk contour to alleviate stress cracking to the trunk lid. Large rubber washers under all spacers, inside and out protect your bikes finish as well as creating a water tight fit. Available in either Chrome or Satin Black.

Fits:

GL1800 2018/2020

Installation:

BRAKE SWITCH BLOCK - ILLUM

Show Chrome Accessories® now offers a Brake Switch Block for the GL1800 2018 and newer Goldwings. This satin black LED switch block assembly incorporates two rocker style switches with blue LED’s in each switch indicating when an accessory is active. Easily control auxiliary driving lights or marker lights. Mounts on the brake side master cylinder of the bike.

Fits:

GL1800 UP TO 2018

Installation:

LOWER WIND DEFLECTOR KIT

A true motorcycle accessory not only must do what it was designed to do, but it needs to look good while doing it. The old adage Form Follows Function, is a constant design practice at Big Bike Parts®, and this cannot be more evident than in their most recent Wind Deflectors for the GL1800. A true Wind Deflector will deflect as much weather away from the rider pocket as possible while still allowing the ability to bring air into the riding pocket at various angles for comfort. These Show Chrome Accessories® Upper and Lower Wind Deflectors do all of this very well...

Fits:

GL 1800 UP TO 2018

Installation:

UPPER WIND DEFLECTOR KIT

A true motorcycle accessory not only must do what it was designed to do, but it needs to look good while doing it. The old adage Form Follows Function, is a constant design practice at Big Bike Parts®, and this cannot be more evident than in their most recent Wind Deflectors for the GL1800. A true Wind Deflector will deflect as much weather away from the rider pocket as possible while still allowing the ability to bring air into the riding pocket at various angles for comfort. These Show Chrome Accessories® Upper and Lower Wind Deflectors do all of this very well...

Fits:

FL1800 UP  TO 2018

Installation:

ENGINE GUARD OPENING TRIM

This black polypropylene trim finishes the opening when you remove the OEM Engine Guard Cover. Ideal when mounting Highway Boards that attach to the case guard such as Show Chrome Accessories 21-353 and 21-354 Highway Boards and mounts. Sold as pair. Easily snaps into place once black engine guard cover is removed, providing a true finished look when using the case guard for mounting.

Fits:

GL1800 UP TO 2018

Installation:

REAR FENDER FILLER

This Rear Fender Filler from Show Chrome Accessories® closes the gaps that the rear fender misses on the 2018 and newer GL1800. It reduces flying road debris missed by the fender, reducing dust and dirt on your bike or trailer, keeping them cleaner. The flat surface created by this rear fender filler allows mounting of accessories and lights to a flat surface. Does not interfere with Show Chrome Accessories® 52-921 Trailer Hitch.

Fits:

GL1800 UP TO 2018

Installation:

GT TOUR TRUNK LIGHT

Big Bike Parts® GT Tour LED Trunk Light for the 2018 GL1800 trunk combines a subtle chrome accent with a pair of multi-function LED lights. The lights match the style of the lower tail lights and lens design. This trunk light puts visibility and a brake light where it needs to be, up high, to enhance safety. Lights provide running, brake and turn signals. Comes with complete instructions. High recommend BBP # 52-942 Isolation Block.

Fits:

GL 1800 2018/2020.

Installation:

DELUXE ARMREST

The selections of Big Bike Parts® Deluxe Passenger Armrests keeps expanding, with their latest offering for the 2018 Honda Goldwing from Show Chrome Accessories®. Custom clamps mount to the passenger handrails, providing a clean mount that is out of the way, allowing the armrests to pivot freely for easy passenger access on and off the bike. Includes chrome or black hardware and complete instructions to make installation easy. Available in Show Chrome Accessories® bright chrome or black satin finish for long term durability.

Fits:

GL1800 2018/2020

Installation:

LAMPGARD GL1800 - 2018 NEWER

With 25 years of experience with their LampGard™ Headlight protectors, Big Bike Parts® adds the 2018 Goldwing to its touring fitments. With headlights getting more sophisticated, the new Goldwing is no exception and the replacement on a cracked assembly could set you back $1,500 or more. Protect it with a hard Acrylic LampGard™ that attaches with custom hook and loop fasteners for ease of cleaning and impact absorption. Sold as pair and with custom high heat adhesive on the attached hook and loop, they will not slide, move or come loose.

Fits:

GL1800 UP TO 2018

Installation:

LED FOG LIGHTS GL1800 2018

A true and effective fog light disperses their beam low, wide and far to allow increased visibility and safety in rain and fog. Big Bike Parts® delivers with their latest Fog Lights for the new 2018 Goldwing. Rubber isolation bushings provide a stable, vibration free light just like the OEM. While they might look similar to the OEM, the LED’s are brighter and the bezel has been designed from scratch to provide a wider and longer photometric for a safer ride. Includes OEM style matching switch and full Plug ‘N Go wire harness. As with OEM, vertical adjustment is available for proper positioning.

Fits:

GL1800 UP TO 2018

Installation:

RED LED MARKER LIGHT SET

Increase being seen and safer with Big Bike Parts® latest Dual Function Marker Lights for the 2018 GL1800 Goldwing. These truly outstanding LED Marker Lights replace the OEM reflectors with a pair of today’s brightest 24 SMD LED’s. Available in either Red or Amber LED’s with clear lenses to match the front mirror turnsignals for a coordinated OEM look. The LED assemblies are sealed for all weather protection and come with embedded bolt, locking pin and double sided tape to insure a secure fit. Includes full instructions and all required t-taps and spade connectors for a convenient install. Reflective backer used around LED’s to maximize candle output. Sold as a pair. High recommend BBP # 52-942 Isolation Block.

Fits:

GL1800 UP TO 2018

Installation:

AMBER LED MARKER LIGHT SET

Increase being seen and safer with Big Bike Parts® latest Dual Function Marker Lights for the 2018 GL1800 Goldwing. These truly outstanding LED Marker Lights replace the OEM reflectors with a pair of today’s brightest 24 SMD LED’s. Available in either Red or Amber LED’s with clear lenses to match the front mirror turnsignals for a coordinated OEM look. The LED assemblies are sealed for all weather protection and come with embedded bolt, locking pin and double sided tape to insure a secure fit. Includes full instructions and all required t-taps and spade connectors for a convenient install. Reflective backer used around LED’s to maximize candle output. Sold as a pair. High recommend BBP # 52-942 Isolation Block.

Fits:

GL1800 UP TO2018

Installation:

VERTICAL RECEIVER HITCH GL1800

Big Bike Parts® is already delivering its all new receiver hitch for the 2018 Honda Goldwing. This vertical receiver design allows a clean look and is almost invisible when the receiver is not in use. This classic 1¼” receiver hitch mounts directly to the bike’s frame and sub frame with provided high strength bolts for a secure fitment. Includes Big Bike Parts® standard anti-chatter bolt design to remove excess movement, improving pulling smoothness and trailer tracking. Includes instructions and all required hardware and can be mounted without removal of the rear tire. Comes with 1 7/8” hitch ball. Fits all models of 2018 Honda Goldwing. Made in USA.

Fits:

GL1800 UP TO 2018

Installation:

TRAILER HARNESS GL1800 2018

Big Bike Parts® has taken its popular Show Chrome Accessories® electronically isolated trailer wiring harness to the 2018 GL1800 Goldwing. With OEM matching connectors an easy install is accomplished with this Plug ‘N Go trailer harness. This 5 wire system is ready to go except for your trailer connector of choice. Plenty of zip ties will keep it secure and off the ground. Comes with complete instructions.

Fits:

GL1800 UP TO 2018

Installation:

Quick Detachable Smart Mount™ Backrest

On the new Goldwing, Honda gives 2 choices – either a stock seat or upgrade to their custom seat, which has more padding and actually raises the seat 1 ½” more than stock seat. To accommodate the custom seat Big Bike Parts® has a tall version of its Quick Detachable Smart Mount™ Backrest for the Goldwing. The removable mount is 1 ½” taller to accommodate the custom seat and is still easily detachable providing a clean look when not installed. As with all Smart Mount™ Backrests riders enjoy 3” of horizontal pad adjustment and 1” of vertical adjustment to ensure a comfortable ride for you. Hopnel™ special density comfort foam pads holds up to daily use without wearing. Made in the USA.

Fits:

GL1800 2018/2020

Installation:

Smart Mount™ Backrests

Big Bike Parts® eleventh fitment of their Smart Mount™ Backrest is for the all-new 2018 Goldwing series. This market proven leader has also become a quick detachable system, allowing the backrest pad and mount to easily detach and be removed through the OEM seat opening, providing a clean look when not installed. As with all Smart Mount™ Backrests, riders enjoy 3” of horizontal pad adjustment and 1” of vertical pad adjustment to ensure a comfortable ride. With the use of Hopnel™ special density comfort foam the pad holds up to daily use without wearing. Made in the USA.

Fits:

GL1800 2018/2020

Installation:

LOWER COWL RECTANGULAR FOG

Big Bike Parts® now offers a brilliant chrome lower cowl matching the GL1800 Gold Wing styling for 2012- 2017 models. This new Show Chrome Accessories® lower cowl is made with the same exceptional quality Gold Wing riders have come to know from Big Bike Parts®. With rectangular knockout blanks, made for Show Chrome Accessories® LED Rectangular Fog Light Kit, you can ride your GL1800 in style, having that brilliant chrome finish you’ve come to love, all while maintaining your original rectangular OEM styling. Upgrade your earlier 2001 through 2010 GL1800 Gold Wing to the new Rectangular Lower Cowl Style and combine with Big Bike Parts® new LED Fog Lights (BBP # 52-906) to maximize seeing and being seen.

Fits:

GL1800 2001/2017

Installation:

SMOKE LOWER WIND DEFLECTOR

These Side Fairing Wind Deflectors for the GL1800 Goldwing feature 100% hidden mounting to provide a clean custom look. No drilling required. These new Lower Side Fairing Wind Deflectors work great in combination with Big Bike Parts®, 52-665U, Upper Side Fairing Wind Deflectors to truly provide a quiet riding envelope for driver and passenger. Both upper and lower systems easily pivot to channel in air for those hot days you need more air to cool off. The custom contoured panels maximize the function and appearance of this great accessory. Fits GL1800 2001-17.

Fits:

GL1800 2001/2017

Installation:

MINI LED KIT GL1800 2001-17

Big Bike Parts® has fitted its popular 2 3/8’’ Litespan LED in a kit for the 2012 and newer GL1800 Goldwing. This miniature LED reflector bulb delivers 490 lumens from its 12 volt 7 watt 6 LED output 4000k bright white LEDs. The concentrated beam angle of 20° puts more light down the road for better driving visibility. The die cast light has a built in visor giving this light style and flair. Comes with pair of mounting brackets, electronic isolated wire harness, relay and switch. The non-dimmable LED may interfere with some weak AM/FM stations. For 2012 – 2017 Honda Goldwings and F6B.

Fits:

GL1800 2001/2017

Installation:

RACK MOUNT KIT F6B

Big Bike Parts® 52-830M mount is used to mount either the Tour Luggage Rack, backrest, or both. If the OEM mount is in place this mount is not required.

Fits:

GL1800 F6B 2013/2017

Installation:

TOUR RACK RISERS

Big Bike Parts® now offers its Rack Risers in black satin for all those matte black racks being mounted. Our Black Satin Rack Risers provide more clearance under your luggage rack allowing for easier cleaning or getting all your other accessories to fit underneath. Universally fits ½’’ diameter round legged racks with custom recessed bevel to securely fit and extend your original rack legs 5/8’’ taller. Comes as 4 set kit with two sets of bolts; 4x6 mm (M6) and ¼- 20 bolts to replace the shorter bolts that come with most racks.

Fits:

GL1500

GL1800 2001/2020

Installation:

NEW STYLE WINDSHIELD VENT

Big Bike Parts® has an all new Windshield Vent for the GL1800 Goldwing, for use on OEM windshields. This tinted vent matches the OEM style introduced in 2004 to fit the curvature of the GL1800 windshields. The 4 anti-fog slots across the top are greatly enlarged over previous models providing increased air flow. A new 5 position lever provides smoother control of position selection. Is not a direct replacement for earlier GL1500 vents. Fits all GL1800 windshields, requires a hole cut, securely mounts with included face mount screws.

Fits:

GL1800 2001/2017

Installation:

SMART MOUNT BACKREST F6B

The Honda F6B now joins the Smart Mount™ family of backrests from Big Bike Parts®, with its own custom engineered driver backrest system. The generous 12 3/8” x 7” full support pad provides superior comfort and support and can be adjusted 1” vertically and 3” horizontally with our exclusive pad hinge and adjustable tongue. A convenient removable storage pouch snaps to the back face. The F6B Smart Mount™ Driver Backrest will have a matching passenger backrest arriving soon.

Fits:

GL1800 F6B 2013/2017

Installation:

SMOKE LIMITED EDITION BADGE

SMOKE LIMITED EDITION, Emblem.

Fits:

GL1800 2001/2017

Installation: