Best sellers

Chrome Steel Plugs ¼ "

The chrome steel plugs fit a ¼ inch screw giving the bike a finished, show bike look. 10 packs.

Fits:

All models

Installation:

FM/Satellite Radio Antenna Tip.

The antenna helps to eliminate FM interference when traveling through high FM output areas. It has a fold down feature to help when stowing the bike. Measures 16 inches. Single.

Fits:

GL1800 2001 to 2017.

Installation:

Central Taillight Trim w/Red Lens Running & Brake Light.

Central Taillight Trim w/Red Lens Running & Brake Light. Ride safer by adding more visibility with this bright LED running and brake light. Replaces Saddlebag Rear Center Cover.

Fits:

GL1800 2018/2021

Installation:

Fog Light with Daytime Running and Turn Signal (DRTS) Lights.

SENTINEL L.E.D. All in one fog lights with integrated daytime running and turn signals have powerful LEDs to brighten up the road and produce a clean white light. They will light up a wider view of the road ahead and cut through the rain and fog like never before. The DRTS are LED lights that operate separate from the fog light. The day time running light is white and the turn signal is amber. The amber LED is activated with the left and right turn signals and emergency flashers on the bike. Installation: Plug N Play – Includes hardware,...

Fits:

Gl1800 2001/2010

Installation:

Sentinel LED Passenger Armrest Lights.

These powerful integrated lights run in three modes; red running, a brighter red brake, and a sequential amber turn signal when activated. The lights wrap around the passenger armrests to provide added safety to the rear and side of the bike. They create an attention getting bright LED that is more easily seen at eye level to approaching vehicles to help you to be seen. The stylish chrome ABS housing is beautiful and functional, reflecting the lights for more effectiveness. They easily attach with strong self adhesive tape and wire connectors for an easy integration into the bike's system. Sold in pairs.

Fits:

Gl1800 2018/2021

Installation:

PathfinderLED Power Distribution Accessory Hub w/OEM harness.

Designed to safely connect your electronic accessories from a central location the PAH60 is a rugged weatherproof power distribution hub with advanced circuitry protection. Easily connect aftermarket lighting such as running lights, third brake lights, or auxiliary equipment without worrying about lighting errors or CANBUS fault codes while protecting your CANBUS electrical system. No complicated software to install/configure and no fuses to ever replace. The PAH60 connects to your 12v power (battery). Plenty of power to keep your entire electronics running! This is the solution to connecting various branded accessories from different manufacturers into one central hub.

Fits:

GL1800 2018/2021

Installation:

PLUG N PLAY CABLE HARNESS

Plug N Play wiring harness connects up to 4 different PathfinderLED front or rear lights. Easily installs PATHFINDERLED (2018+) accessories to factory Honda connection without any wire modifications and will not void factory warranty. All connectors are plug n play using OEM style connectors for a secure fit.

Fits:

GL1800 UO TO 2018

Installation:

• The stock engine guards leave a lot to be desired. Twinart has created chrome ABS covers that install eaily and add just the right amount of sophistication to an otherwise mundane component.

Compatible :

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Instalation :

PASSENGER ARMRESTS FOR NEW GOLDWING

• Keeping your passenger comfortable is the key to a long and enjoyable ride. The Goldstrike™ Passenger Armrests provide unparalleled comfort, durability, and even an accessory port that allows you to bring our Big Ass™ Drink Holder along on your ride. **Accessory adapter included with armrests, Drink Holder shown in image 4 not included.

• Easy installation with only a screwdriver

• Requires no permanent modification to your motorcycle

• Made from soft-touch, durable rubber with a rigid aluminum frame

• Features an accessory port on both sides

• Accessory adapter pivots so your drink stays level when opening the trunk

• Works great with Goldstrike™ P/N C58007 *Patent Pending

Compatible :

Instalation:

BIG ASS™ DRINK HOLDER(NO MOUNT)

• The Ciro® Big Ass™ Drink Holder is the perfect way to bring that 30 oz. tumbler on the road with you.

• The durable neoprene rubber molded net is designed to securely grip your cup so there’s no worry of losing it.

• The rubber is also weatherproof and won’t deteriorate in the sun or elements you encounter on the road. 

• Designed to work with 30 oz. tumblers and other large bottles and cups.

• Made from durable neoprene rubber to grip and last.

• Mounts quickly to Ciro’s line of ball mounts.

• Features a 4-1/8” diameter opening.

• no mount.

Fits: 

Fits any Ciro ball mount.

Instalation:

ADJUSTABLE PASSENGER COMFORT PEG MOUNTS

• The Goldstrike™ Adjustable Passenger Pegs allow you to provide your passenger with a wide range of foot positions to ensure an extremely comfortable ride.

• These mounts simply bolt to the frame of your motorcycle with no modification and feature strong, rigid construction paired with elegant styling.

• The Rail peg is also included which rests perfectly in the arch of your foot with a slight kick up on the end to make sure your foot is secure and doesn’t slide off.

• Simple installation.

• Dozens of position options.

• Bright, durable chrome finish.

• Chrome Or Black Options.

Fits : 

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Installation:

Rear Fender Filler Strips

• The Goldstrike™ Fender Filler Strips are the answer to filling in the ugly gaps between your saddlebags and rear fender.

• Simply slide the filler strips onto each side of the fender, and retain them with the included hidden screws.

• The fillers are made from durable EPDM rubber, which will still allow the fender to be easily removed for service. 

Fits :

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Installation :

Rear Fender Extension Kit with Fender Filler Strips

• The Goldstrike™ Fender Filler Strips are the answer to filling inthe ugly gaps between your saddlebags and rear fender.

• We've styled and textured this to mimic the original materials on your motorcycle. Simply slide the filler strips onto each side of the fender, and retain them with the included hidden screws.

• The fillers are made from durable EPDM rubber, which will still allow the fender to be easily removed for service.

• Also included is our Rear Fender Extension, styled to match your original fender, while also adding 5 inches of length and increasing the width to limit road debris being kicked up off the tire...

Fits : 

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Installation:

DRINK HOLDER

Bring virtually any can, bottle, or cup with you securely and in style with the Goldstrike™ Drink Holder. Chrome plated and made from tough neoprene rubber, this drink holder will really stand up to the elements.

Holds your drink secure with a contoured rubber net

Infinite adjustment with Ciro ball mount design

Rubber lined ring keeps your can or bottle from vibrating

Soft rubber net won’t scratch if it comes in contact with paint

Fits:

All

Installation:

Glove Box Cubby

Convenience at your fingertips! This stylish Glove Box Cubby has a soft foam insert that fits snuggly in your glove box. Available with a chrome or black trim top and includes black snap-in lids with an easy-access drink holder in the center. The top fastens the same as your stock cover and can be easily interchanged to regain your locked storage. No more fumbling for what you need; it's all in this stylish cubby!

Fits:

GL1800 2012-2017 No Airbag.

Installation:

LED Rear Fender Tip

Unmistakable style for your wing! These ultra-bright L.E.D.'s are fully wrapped in fine chrome or high gloss black for an unbeatable look! Functioning as run-brake lights with red or smoke lenses, you'll definitely get noticed! Plug-&-play wiring and simple mounting makes installation a breeze.

Fits:

GL1800 201-2017

Installation:

LED Vertical Rear Light Strips

Catch the attention of motorists in an instant and be the hit of the show with these high-tech L.E.D. accent lights. Featuring red run-brake lights fused with a subtle blend of chrome and perfectly contoured for the GL1800 & F6B models. Plug-&-Play wiring for installation provides ease and worry-free longevity.

Fits:

GL1800 2012-2017

Installation:

LED Passenger Armrest Trim

Introducing a new level of style and function in pure Kuryakyn fashion. Blending chrome and the latest L.E.D. lighting technology, these sculpted accents feature highly visible red L.E.D. run & turn function. Easy plug-&-play installation.

Fits:

GL1800 2006-2017

Installation:

Rear Lower Light Bar Trim

Transform your rear lower light bar from dull and drab to bright and brilliant with these great looking trim accents. Made from high-quality chrome ABS that's lightweight and simple to install with high-strength adhesive.

Fits:

GL1800 2012-2017

Installation:

Saddlebag Harpoon Accents

These simple chrome accents work with the body lines on your Gold Wing to create a swept and flowing body line. High-strength adhesive offers a headache-free installation.

Fits:

GL1800 2012-2017

Installation:

Passenger rear speakers trim

Give your dash a blast of sizzling style that you can see every time you ride. This perfectly sized accent adds much needed chrome to your dash with minimal effort. Bring your bike into the next dimension by showing off those rear speakers in style with the Passenger Speaker Outer Trim. Featuring a 3 dimensional depth design & just the right contour, your bike will shine in any light.

Fits:

GL1800 2006/2017

Installation:

Dash top trim

Allows you to customize your motorcycle

Made of beautiful shiny chrome designed to show off its classic curves and raised lines

Created to give a classic 50's luxury car style Includes (1) Chrome Dash Top Trim, (1) Alcohol Pad;

Suggested for installation: Thoroughly clean the area of grease, oil, dirt or other debris to ensure proper adhesion

Compatible with Gold Wing models:

'06-'17 GL1800 and '13-'16 F6B

Installation:

Handlebar Top Covers

Cockpit transformation taken to the next level with these awe inspiring pieces of eye candy. Cover those ground-casting edges left behind and show off your two-wheeled masterpiece. High-strength adhesive installation means virtually zero downtime.

Fits:

GL1800 2001/2017

Installation:

Fairing Intake Vent Inserts

Transform the plain-jane "black hole" fairing air intake vents with stylish chrome inserts. It couldn't be easier-just clean the inlet surface and apply via the included high-strength adhesive.

Fits:

GL1800 2001/2010

Installetion:

Lightning Valve Covers

Create a sleek, uniform look without compromising the integrity of the stock valve covers & risking leakage or less than perfect fitment. A two-sided adhesive pad designed specifically for high temperatures holds these covers on & they fit snugly right on top of the stock valve covers.

Fits:

GL1800 2001/2017

Installation: