Partie arrière

ELECTRONIC FUSE BLOCK GL1800

Show Chrome Accessories® now offers a Plug N’ Go Electronic Fuse Block for the 2018 and newer Goldwing. Designed with eleven terminal tie in points which are electronically protected by nine separate relays and fuses. Includes: turnsignal, running lights, brake light, always on and keyed connection points. The Goldwing’s electrical system is protected by a 20 amp fuse and separate 30 amp relay to isolate all your electrical accessories from the Goldwing’s electrical system. Comes with two sub harnesses with OEM connectors for seamless connectivity. This is a must have accessory when adding electrical accessories to the 2018 and newer GL1800 Goldwing.

Fits:

GL1800 UP TO 2018

Installation:

BUNGEE SEAT TIE-DOWNS

Show Chrome Accessories® makes strapping down rear seat items easier with this custom contoured pair of Seat Tie Down Brackets, which are an ideal way to attach bungee hooks to your 2018 Goldwing seat. The tie down brackets are contoured for easy use and mounting behind the left and right seat handles. They are angled to minimize damage and wear to the seat as well as for ease of use. Black powder coat finish. Sold as pair.

Fits:

GGL1800 UP TO 2018

Installation:

SADDLEBAG SIDE ACCENT LIGHTS

Being well lit increases motorcycle safety and Big Bike Parts® adds visibility to the saddlebags of the 2018 and newer GL1800 Gold Wing to enhance being seen, with their new GT Saddlebag Side Accents Lights. If you did not know they were added you would think they were OEM, as they follow the bikes design and shape so well. These 12” x ¾” LED Accent Lights have 18 red SMD LED’s per side with matching red reflector lens. These accent lights incorporate a subtle chrome design with the inlaid lens, and can be wired as running and turnsignals to enhance visibility. Attaches securely with acrylic double sided tape and requires a small wiring hole. Comes with all needed components, sold as a pair.

Fits:

GL1800 UP TO 2018

Installation:

SIDE PANEL VENT ACCENT

Show Chrome Accessories® has a set of vent accents that create excitement to the side panels of all models of the 2018 and newer Gold Wing. These vent accents fit nicely into the OEM side panel openings and stay securely in place with double sided tape. Available in Chrome or Black Satin.

Fits:

GL 1800 UP TO 2018

Installation:

Omni LED Rear Saddlebag Accents

Omni L.E.D. Rear Saddlebag Accents look right at home flowing with the outside and lower edges of the saddlebags' rear surface to add depth and intense auxiliary run-turn-brake illumination. Styled to match stock lighting components for seamless integration.

Requires Plug-&-Play Wiring Adapter, P/N 3268, sold separately

If bike is already equipped with P/N 3268 and all three outputs are used, all that is needed is Y-Connector Kit, P/N 3269, sold separately

Provides red run/brake and amber turn signal functionality

Illumination and durable polycarbonate red lenses are styled to match stock lighting components for seamless integration

Fits:

GL1800 UP 2018

Installation:

Omni LED Side Saddlebag Inserts

Ditch the factory saddlebag reflectors for something a lot more functional. Omni L.E.D. Side Saddlebag Inserts replace the simplistic reflectors with auxiliary red run-brake and amber turn signal lighting. Choose chrome or satin black injection-molded ABS housings with red polycarbonate lenses that deliver an aesthetic upgrade when the bike's powered off.

Direct replacements for the stock side saddlebag reflectors

Provides ultra-bright red run-brake and amber turn signal functionality

Durable injection-molded ABS housings, polycarbonate lenses

Requires Kuryakyn Wiring Adapter (P/N 3268, sold separately) for plug-&-play installation

Fits:

GL1800 UP 2018

Installation:

Wiring Adapter

A must-have to make all Kuryakyn Omni L.E.D. lighting products plug-&-play for '18-up Honda Gold Wings. The Wiring Adapter Kit (P/N 3268) supports up to three Kuryakyn lighted accessories and features sealed, high-quality connectors. The Y-Connector Kit (P/N 3269) lets you add even more lighted accessories without having to purchase an additional adapter.

Wiring Adapter Kit supports up to three Kuryakyn lighted accessories

Matches OEM connectors easily accessible beneath the seat

Y-Connector Kit allows installation of four or more additional Kuryakyn lighted accessories w/out separate adapter purchase

Wiring Adapter Kit and Y-Connector Kits sold separately

Fits:

GL1800 UP 2018

Installation:

Passenger Floorboard Covers

The TWINART Passenger Floorboard Covers simply fall into place and add much needed chrome to the side profile of your bike. These covers work perfectly with our chrome side covers and Goldstrike Frame covers to really make an impact and give your bike a full custom look!

Fits:

GL1800 UP 2018

Installation:

Rear Fender Extension Kit with Fender Filler Strips

• The Goldstrike™ Fender Filler Strips are the answer to filling inthe ugly gaps between your saddlebags and rear fender.

• We've styled and textured this to mimic the original materials on your motorcycle. Simply slide the filler strips onto each side of the fender, and retain them with the included hidden screws.

• The fillers are made from durable EPDM rubber, which will still allow the fender to be easily removed for service.

• Also included is our Rear Fender Extension, styled to match your original fender, while also adding 5 inches of length and increasing the width to limit road debris being kicked up off the tire...

Fits : 

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Installation:

Rear Fender Filler Strips

• The Goldstrike™ Fender Filler Strips are the answer to filling in the ugly gaps between your saddlebags and rear fender.

• Simply slide the filler strips onto each side of the fender, and retain them with the included hidden screws.

• The fillers are made from durable EPDM rubber, which will still allow the fender to be easily removed for service. 

Fits :

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Installation :

Chrome Rear Fender Tip

• The Goldstrike™ Fender Tip fits precisely to the contour of your rear fender for an easy way to add a touch of chrome.

Fits : 

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Instalation:

TWIN RAIL INSERTS FOR PASSENGER FLOORBOARDS

• The Goldstrike Twin Rail Passenger Floorboard Inserts replace the mundane OEM floorboard rubber with something much more exciting.

• They feature beautiful chrome accents and textured rubber for comfort, secure grip, and long lasting good looks.

• Styled to complement the Goldstrike Twin Rail Floorboards, Footrests, and Rail Footpegs these passenger floorboard inserts are a great addition to the Goldstrike line.

Fits : 

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Instalaion:

SHOCK & AWE® 2.0, 8" Y-SPLITTERS

• 8" Y-Splitters to add additional light strips to your SHOCK & AWE® 2.0 kit. 

• Two 8" "Y" Splitters.

Fits:

GOLDWING 1800 UP 2018

Instalation:

FLAG POLE MOUNTS

• LED Lighted Flag Pole with American Flag sold separately 

• Each kit comes with hardware and mounts to install one flag on the left or right side of the trunk. If installing two flags you will need two complete mounting kits. 

• C78605 Trunk Lid Mount.

Fits:  GL1800 Touring / Touring DCT Models 2018 and up.

• C78606 Tubular Luggage Rack Mount.

Fits: 1/2" diameter tubing.

• C78607 Flat Luggage Rack Mount.

Fits: Most popular flat billet style luggage racks. (Will not order on the Honda accessory luggage rack)

• C78608 Antenna Mount.

Fits: .6" diameter typically found on stock antennas on '01-'17 GL1800.

CHROME LED LIGHTED FLAG POLE WITH AMERICAN FLAG

• Show your colors day or night as you proudly display the flag with the help of the Goldstrike LED Lighted Flag Pole.

• Easy mounting with no drilling required when used with one of the Goldstrike flag mounts. Also works well with any 6"x 9" sized flags.

• Built-in white LEDs can be powered by any 12v source. Flag mount sold separately.

• American Flag included.

• No drilling required.

• Works well with any 6"x9" sized flags.

• Built-in white LEDs can be powered by any 12v source.

Instalation:

PASSENGER ARMRESTS FOR NEW GOLDWING

• Keeping your passenger comfortable is the key to a long and enjoyable ride. The Goldstrike™ Passenger Armrests provide unparalleled comfort, durability, and even an accessory port that allows you to bring our Big Ass™ Drink Holder along on your ride. **Accessory adapter included with armrests, Drink Holder shown in image 4 not included.

• Easy installation with only a screwdriver

• Requires no permanent modification to your motorcycle

• Made from soft-touch, durable rubber with a rigid aluminum frame

• Features an accessory port on both sides

• Accessory adapter pivots so your drink stays level when opening the trunk

• Works great with Goldstrike™ P/N C58007 *Patent Pending

Compatible :

Instalation:

LED FLAG POLE TURN SIGNAL MODULE

• Installing with LIGHTED FLAG POLE ( P/N C450 OR C460) to activate turn signal function.

• It will activate amber turn signal.

• Goldstrike Plug & Play Installation kit(C48000) required.

Compatible :

GL1800 Touring / Touring DCT Models 2018 and up.

Instalation :

FLAG POLE FOR 18-UP GOLDWING

• Flag pole installed on each sides of trunk of 2018-up Goldwing Tour model. Chrome finished will give clean look. Same place as OEM factory CB antenna.

• Sold as each, Left or Right side.

• Die castedA380 Aluminium

• Bracket included

• CNC machined 6061 AL pole and topper

• U.S.A Flag included

• Including all required hardware

• Installation support bracket(fixture) included to drill from outside of trunk. You don't have to take covers out!

Compatible :

GL1800 Touring / Touring DCT Models 2018 and up.

Instalation :

• The Twinart License Light Lid is a great way to set your bike apart from the rest with this premium and affordable accent piece.

• Chrome plated ABS plastic

• Easy and quick installation

• Decorative accent

• Quickly change the appearance of your bike with no tools required.

Compatible :

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Installation :

SADDLEBAG GUARD COVERS

The stock saddlebag guards leave a lot to be desired.

Twinart has created chrome ABS covers that install eaily and add just the right amount of sophistication to an otherwise mundane component.

Compatible :

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Instalation

Shock & Awe® 2.0 takes your LED lighting kit to the next level. Along with being fully programmable for color, flash and pattern modes, we’ve packed the app full of exciting features. Racing mode to track your speed, music and microphone integration, 3 channel output, and even camera integration to capture custom colors. New smart brake function makes your light kit turn red when brakes are applied, and with the Ciro® Bluetooth app you are able to choose from a million colors to find the perfect match for your bike. Our lighting kit includes detailed placement instructions and plug-n-play wiring to make installation a breeze.

Instalation:

LED SADDLEBAG LIGHTS

• These run-turn Saddlebag Lights are simple to install with no drilling required. Messy wiring is eliminated by using the Goldstrike™ plug-n-play harness. The design adds visibility to the side of your Gold Wing as well as the rear. Designed to seamlessly flow with the motorcycle's styling, you are adding safety and style at the same time.

• Red running light, Bright red turn signal

• Light pipe refracting technology . Strong polycarbonate construction. *Patent Pending

• CHROME OR BLACK Compatible : GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Installation :

LED REFLECTOR REPLACEMENT

• The Goldstrike™ LED Reflector Replacement eliminates the ugly factory reflector just above your license plate, replacing it with a whole new interpretation of accessory lighting. Featuring plug-n-play connectors and does NOT require Plug-n-Play Harness (P/N 48000).

• Easy plug-n-play installation. LED light helps increase visibility. Eliminates unsightly reflector on 2018-up Gold Wings. *Patent Pending

Fits :

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Installation :

LIGHTING "Y" SPLITTER

• Required to install Goldstrike™ rear end lighting components when there are more than four accessories. 

Fits : 

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

PLUG-N-PLAY LIGHTING INSTALLATION KIT

• The Goldstrike™ Plug-n-Play Harness is required to install any Goldstrike™ lighting (except 40035). The Plug-n-Play Lighting Installation Kit (48000) will accept four different lights (additional lights will need 48001). Our design utilizes factory style waterproof locking connectors for easy install with no modifications to your motorcycle. 

• Plug-n-Play Harness must be purchased separately on all Goldstrike™ LED products.   Utilizes factory style waterproof locking connectors.   Easy installation with no modifications to your motorcycle.

Fits : 

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Instalation