Parite arrière

UNIVERSAL TRAILER HITCH RACK

Big Bike Parts® lets you take more on your ride without your trailer. The all new Universal Trailer Hitch Rack offers generous 16” x 10 ½” platform that can accommodate coolers, extra luggage, bags and more. Its 1 ½” high tubular frame is deep enough to secure your load and give you piece of mind while riding. A simple mounting bracket design uses your hitch ball as its mounting bolt with a custom designed washer that prevents movement once securely tightened. Works withmost receivers up to 3” wide and fits balls with up to a ¾” shank. As it mounts to the receiver ball mount, it fits with both horizontal and vertical receiver hitch assemblies...

Fits:

ALL GOLGWING with rack

Installation:

TOUR RACK RISERS

Big Bike Parts® now offers its Rack Risers in black satin for all those matte black racks being mounted. Our Black Satin Rack Risers provide more clearance under your luggage rack allowing for easier cleaning or getting all your other accessories to fit underneath. Universally fits ½’’ diameter round legged racks with custom recessed bevel to securely fit and extend your original rack legs 5/8’’ taller. Comes as 4 set kit with two sets of bolts; 4x6 mm (M6) and ¼- 20 bolts to replace the shorter bolts that come with most racks.

Fits:

GL1500

GL1800 2001/2020

Installation:

TRAILER HARNESS GL1800 2018

Big Bike Parts® has taken its popular Show Chrome Accessories® electronically isolated trailer wiring harness to the 2018 GL1800 Goldwing. With OEM matching connectors an easy install is accomplished with this Plug ‘N Go trailer harness. This 5 wire system is ready to go except for your trailer connector of choice. Plenty of zip ties will keep it secure and off the ground. Comes with complete instructions.

Fits:

GL1800 UP TO 2018

Installation:

VERTICAL RECEIVER HITCH GL1800

Big Bike Parts® is already delivering its all new receiver hitch for the 2018 Honda Goldwing. This vertical receiver design allows a clean look and is almost invisible when the receiver is not in use. This classic 1¼” receiver hitch mounts directly to the bike’s frame and sub frame with provided high strength bolts for a secure fitment. Includes Big Bike Parts® standard anti-chatter bolt design to remove excess movement, improving pulling smoothness and trailer tracking. Includes instructions and all required hardware and can be mounted without removal of the rear tire. Comes with 1 7/8” hitch ball. Fits all models of 2018 Honda Goldwing. Made in USA.

Fits:

GL1800 UP TO 2018

Installation:

RED LED MARKER LIGHT SET

Increase being seen and safer with Big Bike Parts® latest Dual Function Marker Lights for the 2018 GL1800 Goldwing. These truly outstanding LED Marker Lights replace the OEM reflectors with a pair of today’s brightest 24 SMD LED’s. Available in either Red or Amber LED’s with clear lenses to match the front mirror turnsignals for a coordinated OEM look. The LED assemblies are sealed for all weather protection and come with embedded bolt, locking pin and double sided tape to insure a secure fit. Includes full instructions and all required t-taps and spade connectors for a convenient install. Reflective backer used around LED’s to maximize candle output. Sold as a pair. High recommend BBP # 52-942 Isolation Block.

Fits:

GL1800 UP TO 2018

Installation:

DELUXE ARMREST

The selections of Big Bike Parts® Deluxe Passenger Armrests keeps expanding, with their latest offering for the 2018 Honda Goldwing from Show Chrome Accessories®. Custom clamps mount to the passenger handrails, providing a clean mount that is out of the way, allowing the armrests to pivot freely for easy passenger access on and off the bike. Includes chrome or black hardware and complete instructions to make installation easy. Available in Show Chrome Accessories® bright chrome or black satin finish for long term durability.

Fits:

GL1800 2018/2020

Installation:

GT TOUR TRUNK LIGHT

Big Bike Parts® GT Tour LED Trunk Light for the 2018 GL1800 trunk combines a subtle chrome accent with a pair of multi-function LED lights. The lights match the style of the lower tail lights and lens design. This trunk light puts visibility and a brake light where it needs to be, up high, to enhance safety. Lights provide running, brake and turn signals. Comes with complete instructions. High recommend BBP # 52-942 Isolation Block.

Fits:

GL 1800 2018/2020.

Installation:

REAR FENDER FILLER

This Rear Fender Filler from Show Chrome Accessories® closes the gaps that the rear fender misses on the 2018 and newer GL1800. It reduces flying road debris missed by the fender, reducing dust and dirt on your bike or trailer, keeping them cleaner. The flat surface created by this rear fender filler allows mounting of accessories and lights to a flat surface. Does not interfere with Show Chrome Accessories® 52-921 Trailer Hitch.

Fits:

GL1800 UP TO 2018

Installation:

GT TOUR RACK GL1800 CHROME

This GT Tour Rack from Show Chrome Accessories® gracefully complements the natural lines of the 2018 Goldwing trunk. Its generous 22 ½” x 15” overall size will easily accommodate your favorite luggage tour bag as well as allow it to be securely fastened with its no slip corner tie down points. As with all Show Chrome Accessories® drill through racks it comes with custom recessed spacers that are tapered to allow easy matching to the trunk contour to alleviate stress cracking to the trunk lid. Large rubber washers under all spacers, inside and out protect your bikes finish as well as creating a water tight fit. Available in either Chrome or Satin Black.

Fits:

GL1800 2018/2020

Installation:

ELECTRONIC FUSE BLOCK GL1800

Show Chrome Accessories® now offers a Plug N’ Go Electronic Fuse Block for the 2018 and newer Goldwing. Designed with eleven terminal tie in points which are electronically protected by nine separate relays and fuses. Includes: turnsignal, running lights, brake light, always on and keyed connection points. The Goldwing’s electrical system is protected by a 20 amp fuse and separate 30 amp relay to isolate all your electrical accessories from the Goldwing’s electrical system. Comes with two sub harnesses with OEM connectors for seamless connectivity. This is a must have accessory when adding electrical accessories to the 2018 and newer GL1800 Goldwing.

Fits:

GL1800 UP TO 2018

Installation:

BUNGEE SEAT TIE-DOWNS

Show Chrome Accessories® makes strapping down rear seat items easier with this custom contoured pair of Seat Tie Down Brackets, which are an ideal way to attach bungee hooks to your 2018 Goldwing seat. The tie down brackets are contoured for easy use and mounting behind the left and right seat handles. They are angled to minimize damage and wear to the seat as well as for ease of use. Black powder coat finish. Sold as pair.

Fits:

GGL1800 UP TO 2018

Installation:

SADDLEBAG SIDE ACCENT LIGHTS

Being well lit increases motorcycle safety and Big Bike Parts® adds visibility to the saddlebags of the 2018 and newer GL1800 Gold Wing to enhance being seen, with their new GT Saddlebag Side Accents Lights. If you did not know they were added you would think they were OEM, as they follow the bikes design and shape so well. These 12” x ¾” LED Accent Lights have 18 red SMD LED’s per side with matching red reflector lens. These accent lights incorporate a subtle chrome design with the inlaid lens, and can be wired as running and turnsignals to enhance visibility. Attaches securely with acrylic double sided tape and requires a small wiring hole. Comes with all needed components, sold as a pair.

Fits:

GL1800 UP TO 2018

Installation:

SIDE PANEL VENT ACCENT

Show Chrome Accessories® has a set of vent accents that create excitement to the side panels of all models of the 2018 and newer Gold Wing. These vent accents fit nicely into the OEM side panel openings and stay securely in place with double sided tape. Available in Chrome or Black Satin.

Fits:

GL 1800 UP TO 2018

Installation:

Multi-Rack Adjustable Trunk Luggage Rack

Designed to fit virtually any tour trunk thanks to the ingenious adjustable mounting stand-offs, this luggage rack can conform to any trunk lid whether flat or curved. Features include a 1/2" tubular design that allows the use of any common flag holder if desired, as well as handy built-in corner loops to keep your luggage secure. Also included in the kit, a pair of mounting extensions for trunk lids with a steep downward rear swoop or with a trunk lid spoiler installed.

Dims: 21"W x 12"L

Fits:

GL1500

GL1800 2001/2021

All models

Installation:

Luggage Rack Risers

By popular demand, we now offer a kit to raise our Luggage Rack (P/N 7151 or 7157) by 5/8 of an inch to provide a larger diameter footprint. The additional height makes cleaning under your rack easier and also spreads out the load more evenly. Installation reuses stock mounting holes if already equipped with a luggage rack.

Fits:

GL1800 2001/2020

Installation:

Luggage Rack

The styling of our Luggage Rack for Gold Wings is a perfect match for the venerable GL1800 platform — and now it's available in stealthy Gloss Black! Constructed from durable cast aluminum, the contoured design pairs perfectly with the shape of GL1800 tour trunks and features a no-slip rubber insert that helps keep your load firmly planted. Available Luggage Rack Risers sold separately (P/N 7154 - Chrome, P/N 7158 - Gloss Black).

Fits:

GL1800 2001/2020

Installation:

Omni Passenger Armrests

Omni Passenger Armrests deliver leisurely comfort for passengers without all the bulk. Simply flip the armrests up when not in use and they blend in with the passenger backrest.

Armrest Pad Dims: 6.7" Long x 2.5" Wide x 1.5" Thick (approx)

No drilling required; bolts on the OEM mounting location

Durable aluminum and over-molded steel construction with soft padding

Compact design keeps a clean appearance

Fits:

GL1800 TO 2018 - 2020

Installation:

Trunk Liner

Keep the contents of your GL1800 Tour trunk organized and ready for easy unloading when you reach your destination. Features include a large main storage compartment, smaller outer zippered pocket and an included removable shoulder strap for easy portability off the bike.

Durable and lightweight 1200 denier polyester construction with PVC backing

Extended zipper pulls offer easy access with or without gloves

Collapsible design for convenient storage when not in use

Includes removable padded shoulder strap and soft-touch carrying handle for easy portability off the bike

Fits:

GL100 UP TO 2018

Installation:

Omni LED Rear Saddlebag Accents

Omni L.E.D. Rear Saddlebag Accents look right at home flowing with the outside and lower edges of the saddlebags' rear surface to add depth and intense auxiliary run-turn-brake illumination. Styled to match stock lighting components for seamless integration.

Requires Plug-&-Play Wiring Adapter, P/N 3268, sold separately

If bike is already equipped with P/N 3268 and all three outputs are used, all that is needed is Y-Connector Kit, P/N 3269, sold separately

Provides red run/brake and amber turn signal functionality

Illumination and durable polycarbonate red lenses are styled to match stock lighting components for seamless integration

Fits:

GL1800 UP 2018

Installation:

Omni LED Side Saddlebag Inserts

Ditch the factory saddlebag reflectors for something a lot more functional. Omni L.E.D. Side Saddlebag Inserts replace the simplistic reflectors with auxiliary red run-brake and amber turn signal lighting. Choose chrome or satin black injection-molded ABS housings with red polycarbonate lenses that deliver an aesthetic upgrade when the bike's powered off.

Direct replacements for the stock side saddlebag reflectors

Provides ultra-bright red run-brake and amber turn signal functionality

Durable injection-molded ABS housings, polycarbonate lenses

Requires Kuryakyn Wiring Adapter (P/N 3268, sold separately) for plug-&-play installation

Fits:

GL1800 UP 2018

Installation:

Wiring Adapter

A must-have to make all Kuryakyn Omni L.E.D. lighting products plug-&-play for '18-up Honda Gold Wings. The Wiring Adapter Kit (P/N 3268) supports up to three Kuryakyn lighted accessories and features sealed, high-quality connectors. The Y-Connector Kit (P/N 3269) lets you add even more lighted accessories without having to purchase an additional adapter.

Wiring Adapter Kit supports up to three Kuryakyn lighted accessories

Matches OEM connectors easily accessible beneath the seat

Y-Connector Kit allows installation of four or more additional Kuryakyn lighted accessories w/out separate adapter purchase

Wiring Adapter Kit and Y-Connector Kits sold separately

Fits:

GL1800 UP 2018

Installation:

Passenger Floorboard Covers

The TWINART Passenger Floorboard Covers simply fall into place and add much needed chrome to the side profile of your bike. These covers work perfectly with our chrome side covers and Goldstrike Frame covers to really make an impact and give your bike a full custom look!

Fits:

GL1800 UP 2018

Installation:

LED TOUR BLADE

PLEASE NOTE: C48000 Plug-n-Play installation kit is required for installation. One C48000 will support up to 4 light kits. C48001 “Y” splitter is required for more than 4 accessories.

• Failure to use the C48000 Plug-N-Play installation kit to install any of the Goldstrike Plug-N-Play lighting or Twinart Lighting accessories will void all warranties on those accessories. 

Fits :

GL1800 Touring / Touring DCT Models 2018 and up.

Installation :

Rear Fender Extension Kit with Fender Filler Strips

• The Goldstrike™ Fender Filler Strips are the answer to filling inthe ugly gaps between your saddlebags and rear fender.

• We've styled and textured this to mimic the original materials on your motorcycle. Simply slide the filler strips onto each side of the fender, and retain them with the included hidden screws.

• The fillers are made from durable EPDM rubber, which will still allow the fender to be easily removed for service.

• Also included is our Rear Fender Extension, styled to match your original fender, while also adding 5 inches of length and increasing the width to limit road debris being kicked up off the tire...

Fits : 

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Installation:

Rear Fender Filler Strips

• The Goldstrike™ Fender Filler Strips are the answer to filling in the ugly gaps between your saddlebags and rear fender.

• Simply slide the filler strips onto each side of the fender, and retain them with the included hidden screws.

• The fillers are made from durable EPDM rubber, which will still allow the fender to be easily removed for service. 

Fits :

GL1800 Bagger / Touring / Touring DCT Models 2018 and up.

Installation :