GOLDWING TOURING

LOWER WIND DEFLECTOR KIT

A true motorcycle accessory not only must do what it was designed to do, but it needs to look good while doing it. The old adage Form Follows Function, is a constant design practice at Big Bike Parts®, and this cannot be more evident than in their most recent Wind Deflectors for the GL1800. A true Wind Deflector will deflect as much weather away from the rider pocket as possible while still allowing the ability to bring air into the riding pocket at various angles for comfort. These Show Chrome Accessories® Upper and Lower Wind Deflectors do all of this very well...

Fits:

GL 1800 UP TO 2018

Installation:

BRAKE SWITCH BLOCK - ILLUM

Show Chrome Accessories® now offers a Brake Switch Block for the GL1800 2018 and newer Goldwings. This satin black LED switch block assembly incorporates two rocker style switches with blue LED’s in each switch indicating when an accessory is active. Easily control auxiliary driving lights or marker lights. Mounts on the brake side master cylinder of the bike.

Fits:

GL1800 UP TO 2018

Installation:

GT TOUR RACK GL1800 CHROME

This GT Tour Rack from Show Chrome Accessories® gracefully complements the natural lines of the 2018 Goldwing trunk. Its generous 22 ½” x 15” overall size will easily accommodate your favorite luggage tour bag as well as allow it to be securely fastened with its no slip corner tie down points. As with all Show Chrome Accessories® drill through racks it comes with custom recessed spacers that are tapered to allow easy matching to the trunk contour to alleviate stress cracking to the trunk lid. Large rubber washers under all spacers, inside and out protect your bikes finish as well as creating a water tight fit. Available in either Chrome or Satin Black.

Fits:

GL1800 2018/2020

Installation:

FRONT FENDER EXTENSION BLACK

This Show Chrome Accessories® Front Fender Extension adds 6 ½” to the length of the 2018 Goldwing fender. The added length greatly reduces the amount of road debris kicking into the lower cowl and all its associated dirt, helping keep the Goldwing clean. Made from polypropylene to match the OEM fender. Mounts securely with double sided tape and 2 custom mounting screws with blind nuts for a secure fit.

Fits:

GL1800 UP TO 2018

Installation:

GT TOUR COWL LIGHT

Research has shown that adding additional functions such as daytime running lights and turnsignals to the new GL1800 fog light only takes away from the light envelope and function of the fog light. So Show Chrome Accessories® has created a special GT Tour Cowl Light that actually enhances your safety and visibility while working with not only OEM but Show Chrome Accessories® own 52-924 Fog Lights. This GT Tour Cowl Light set mounts to the corners of the lower cowl bringing unprecedented daytime running lights to the front as well as benefiting as a cornering light...

Fits:

GL1800 UP TO 2018

Installation:

FRONT FENDER TIP ACCENT

Show Chrome Accessories® now offers a Front Fender Tip Accent in either bright chrome or satin black for the GL1800 2018 and newer Goldwings. This Front Fender Tip Accent complements the bikes front fender while accenting the bikes clean look. The no drill installation is easy utilizing 3M, high strength, long lasting double sided tape.

Fits:

Gl1800 UP TO 2018

Installation:

FRONT FENDER SIDE ACCENTS

Show Chrome Accessories® now offers Front Fender Side Accents for the GL1800 2018 and newer Goldwings. The Front Fender Side Accents complement the bikes front fender while offering a clean look without overpowering the bikes color. These accents make a great addition to any 2018 and newer Honda Goldwing and Goldwing Tour Models. They are offered in either chrome or satin black. The no drill installation is quick and easy utilizing 3M, high strength, long lasting double sided tape.

Fits:

GL1800 UP TO 2018

Installation:

ELECTRONIC FUSE BLOCK GL1800

Show Chrome Accessories® now offers a Plug N’ Go Electronic Fuse Block for the 2018 and newer Goldwing. Designed with eleven terminal tie in points which are electronically protected by nine separate relays and fuses. Includes: turnsignal, running lights, brake light, always on and keyed connection points. The Goldwing’s electrical system is protected by a 20 amp fuse and separate 30 amp relay to isolate all your electrical accessories from the Goldwing’s electrical system. Comes with two sub harnesses with OEM connectors for seamless connectivity. This is a must have accessory when adding electrical accessories to the 2018 and newer GL1800 Goldwing.

Fits:

GL1800 UP TO 2018

Installation:

GT CALIPER COVER

Big Bike Parts® GT Caliper Covers mount over the front brake calipers providing a true custom caliper cover. The increased aerodynamics around the brakes can minimize the spread of brake dust. Mounts to existing OEM bolt locations with new mounts and hardware. These GT Caliper Covers provide full coverage of the brake calipers and provide a great look with their scoop design and vents. For 2018 and newer GL1800 Goldwings. Available in black and chrome.

Fits:

GL1800 UP TO 2018

Installation:

BUNGEE SEAT TIE-DOWNS

Show Chrome Accessories® makes strapping down rear seat items easier with this custom contoured pair of Seat Tie Down Brackets, which are an ideal way to attach bungee hooks to your 2018 Goldwing seat. The tie down brackets are contoured for easy use and mounting behind the left and right seat handles. They are angled to minimize damage and wear to the seat as well as for ease of use. Black powder coat finish. Sold as pair.

Fits:

GGL1800 UP TO 2018

Installation:

SADDLEBAG SIDE ACCENT LIGHTS

Being well lit increases motorcycle safety and Big Bike Parts® adds visibility to the saddlebags of the 2018 and newer GL1800 Gold Wing to enhance being seen, with their new GT Saddlebag Side Accents Lights. If you did not know they were added you would think they were OEM, as they follow the bikes design and shape so well. These 12” x ¾” LED Accent Lights have 18 red SMD LED’s per side with matching red reflector lens. These accent lights incorporate a subtle chrome design with the inlaid lens, and can be wired as running and turnsignals to enhance visibility. Attaches securely with acrylic double sided tape and requires a small wiring hole. Comes with all needed components, sold as a pair.

Fits:

GL1800 UP TO 2018

Installation:

CYLINDER HEAD COVER

These Engine Cylinder Covers close up the unsightly gap on the 2018 and newer GL1800 Goldwing engine, hiding tubes and various exposed frame and bolts. They also cover the many recesses on the top of the engine, which are notorious for collecting sand, gravel and other road debris while riding. The satin black finish makes these Engine Cylinder Covers virtually disappear, and will help keep your engine looking clean no matter where you ride. Mounts using existing bolts, comes with custom washers to ensure secure fit.

Fits:

GL1800 UP TO 2018

Installation:

SIDE PANEL VENT ACCENT

Show Chrome Accessories® has a set of vent accents that create excitement to the side panels of all models of the 2018 and newer Gold Wing. These vent accents fit nicely into the OEM side panel openings and stay securely in place with double sided tape. Available in Chrome or Black Satin.

Fits:

GL 1800 UP TO 2018

Installation:

FRONT FENDER VENT ACCENT

Show Chrome Accessories® has designed a great pair of vent fillers for the front fender of the 2018 and newer Gold Wing. These vent fillers help dress up the front fender and will fit all models. The accents fit the OEM openings and are secured with Show Chrome Accessories® tried and proven double sided tape for long term adhering. Available in Chrome or Black Satin Finish.

Fits:

GL1800 UP TO 2018

Installation:

Multi-Rack Adjustable Trunk Luggage Rack

Designed to fit virtually any tour trunk thanks to the ingenious adjustable mounting stand-offs, this luggage rack can conform to any trunk lid whether flat or curved. Features include a 1/2" tubular design that allows the use of any common flag holder if desired, as well as handy built-in corner loops to keep your luggage secure. Also included in the kit, a pair of mounting extensions for trunk lids with a steep downward rear swoop or with a trunk lid spoiler installed.

Dims: 21"W x 12"L

Fits:

GL1500

GL1800 2001/2021

All models

Installation:

Luggage Rack Risers

By popular demand, we now offer a kit to raise our Luggage Rack (P/N 7151 or 7157) by 5/8 of an inch to provide a larger diameter footprint. The additional height makes cleaning under your rack easier and also spreads out the load more evenly. Installation reuses stock mounting holes if already equipped with a luggage rack.

Fits:

GL1800 2001/2020

Installation:

Luggage Rack

The styling of our Luggage Rack for Gold Wings is a perfect match for the venerable GL1800 platform — and now it's available in stealthy Gloss Black! Constructed from durable cast aluminum, the contoured design pairs perfectly with the shape of GL1800 tour trunks and features a no-slip rubber insert that helps keep your load firmly planted. Available Luggage Rack Risers sold separately (P/N 7154 - Chrome, P/N 7158 - Gloss Black).

Fits:

GL1800 2001/2020

Installation:

Omni Levers

Trust us; Omni Levers feel as good as they look. The ergonomic design is precisely contoured and angled to deliver comfortable, controlled actuation of the clutch or front brake.

Sleek, angular design to complement the lines of the bike

Ergonomic feel for comfortable, effortless pullback

Does NOT retain adjustability of the OEM levers

Made from quality aluminum offered in chrome or satin black

Fits:

GL1800 UP TO 2018

Installation:

Omni Driver Backrest

Who said a Gold Wing couldn't get any more comfortable? Our Driver Backrest features adjustable height plus forward tilt for maximum rider comfort and support, while its finely sculpted pad and durable cover perfectly match the overall styling of the OEM seat.

Includes backrest receiver that mounts to the bottom of the seat pan for easy installation and secure operation

Adjustable height, forward tilt positioning and easy removal — all without tools

Folds forward and out of the way for passenger loading/unloading

Built-in pouch on the back of the pad offers convenient storage for small items

Cover is made from UV-resistant polyurethane material for strength and durability

Fits:

GL1800 2018/2020

Installation:

Omni Passenger Armrests

Omni Passenger Armrests deliver leisurely comfort for passengers without all the bulk. Simply flip the armrests up when not in use and they blend in with the passenger backrest.

Armrest Pad Dims: 6.7" Long x 2.5" Wide x 1.5" Thick (approx)

No drilling required; bolts on the OEM mounting location

Durable aluminum and over-molded steel construction with soft padding

Compact design keeps a clean appearance

Fits:

GL1800 TO 2018 - 2020

Installation:

Omni Grips

Omni Grips for Gold Wing feature a clamshell design that easily installs over the factory grips to retain full OEM heat functionality but offer a significant upgrade in style.

Aluminum housings with premium EPDM rubber for grip and vibration dampening

Wide-style grip provides comfort and relieves hand fatigue

Two-piece clamshell design does not require removal of OEM grips

Angular cutouts with form-fitted rubber inserts match the lines of the bike

Styled to match the complete line of Omni products for 2018-later Gold Wing

Fits:

GL 1800 UP TO 2018

Installation:

Air Deflectors

Close the vents to direct engine heat and turbulent airflow around the cockpit, or open them up in cold-weather riding to redirect the warm air toward you. Our Air Deflectors adjust to multiple secure positions so you can direct airflow exactly where you want it, all while seamlessly blending in with the Gold Wing's front cowling.

Spring-loaded mechanism for secure adjustability

Durable ABS and shatter-resistant polycarbonate construction

Dark smoke tint for added style

FIts:

GL1800 UP TO 2018

Installation:

Adjustable Upper Air Deflectors

The perfect functional complement to the redesigned Kuryakyn Air

Deflectors for 2018-later Honda Gold Wing (P/N 6579, sold separately), these Adjustable Upper Air Deflectors open to redirect airflow into the cockpit to lessen buffeting and provide riders with a light, refreshing breeze!

Made from durable scratch- and shatter-resistant polycarbonate blades Dark smoke tint adds style and matches Kuryakyn P/N 6579 Air Deflectors for a clean, uniform look

Adjust to two positions: open and closed

Easy installation with simple hand tools

Fits:

GL1800 UP TO 2018

Installation:

Trunk Liner

Keep the contents of your GL1800 Tour trunk organized and ready for easy unloading when you reach your destination. Features include a large main storage compartment, smaller outer zippered pocket and an included removable shoulder strap for easy portability off the bike.

Durable and lightweight 1200 denier polyester construction with PVC backing

Extended zipper pulls offer easy access with or without gloves

Collapsible design for convenient storage when not in use

Includes removable padded shoulder strap and soft-touch carrying handle for easy portability off the bike

Fits:

GL100 UP TO 2018

Installation:

Chrome Frame Cover

This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from industry-leading materials using up-to-date equipment, it ensures everlasting reliability and enduring value. This product is distinguished by total quality assurance, unsurpassed by anybody else.

Fits:

GL1800 UP TO 2018

Installation: