GOLDWING BAGGER

GT CALIPER COVER

Big Bike Parts® GT Caliper Covers mount over the front brake calipers providing a true custom caliper cover. The increased aerodynamics around the brakes can minimize the spread of brake dust. Mounts to existing OEM bolt locations with new mounts and hardware. These GT Caliper Covers provide full coverage of the brake calipers and provide a great look with their scoop design and vents. For 2018 and newer GL1800 Goldwings. Available in black and chrome.

Fits:

GL1800 UP TO 2018

Installation:

BUNGEE SEAT TIE-DOWNS

Show Chrome Accessories® makes strapping down rear seat items easier with this custom contoured pair of Seat Tie Down Brackets, which are an ideal way to attach bungee hooks to your 2018 Goldwing seat. The tie down brackets are contoured for easy use and mounting behind the left and right seat handles. They are angled to minimize damage and wear to the seat as well as for ease of use. Black powder coat finish. Sold as pair.

Fits:

GGL1800 UP TO 2018

Installation:

SADDLEBAG SIDE ACCENT LIGHTS

Being well lit increases motorcycle safety and Big Bike Parts® adds visibility to the saddlebags of the 2018 and newer GL1800 Gold Wing to enhance being seen, with their new GT Saddlebag Side Accents Lights. If you did not know they were added you would think they were OEM, as they follow the bikes design and shape so well. These 12” x ¾” LED Accent Lights have 18 red SMD LED’s per side with matching red reflector lens. These accent lights incorporate a subtle chrome design with the inlaid lens, and can be wired as running and turnsignals to enhance visibility. Attaches securely with acrylic double sided tape and requires a small wiring hole. Comes with all needed components, sold as a pair.

Fits:

GL1800 UP TO 2018

Installation:

CYLINDER HEAD COVER

These Engine Cylinder Covers close up the unsightly gap on the 2018 and newer GL1800 Goldwing engine, hiding tubes and various exposed frame and bolts. They also cover the many recesses on the top of the engine, which are notorious for collecting sand, gravel and other road debris while riding. The satin black finish makes these Engine Cylinder Covers virtually disappear, and will help keep your engine looking clean no matter where you ride. Mounts using existing bolts, comes with custom washers to ensure secure fit.

Fits:

GL1800 UP TO 2018

Installation:

SIDE PANEL VENT ACCENT

Show Chrome Accessories® has a set of vent accents that create excitement to the side panels of all models of the 2018 and newer Gold Wing. These vent accents fit nicely into the OEM side panel openings and stay securely in place with double sided tape. Available in Chrome or Black Satin.

Fits:

GL 1800 UP TO 2018

Installation:

FRONT FENDER VENT ACCENT

Show Chrome Accessories® has designed a great pair of vent fillers for the front fender of the 2018 and newer Gold Wing. These vent fillers help dress up the front fender and will fit all models. The accents fit the OEM openings and are secured with Show Chrome Accessories® tried and proven double sided tape for long term adhering. Available in Chrome or Black Satin Finish.

Fits:

GL1800 UP TO 2018

Installation:

Omni Levers

Trust us; Omni Levers feel as good as they look. The ergonomic design is precisely contoured and angled to deliver comfortable, controlled actuation of the clutch or front brake.

Sleek, angular design to complement the lines of the bike

Ergonomic feel for comfortable, effortless pullback

Does NOT retain adjustability of the OEM levers

Made from quality aluminum offered in chrome or satin black

Fits:

GL1800 UP TO 2018

Installation:

Omni Driver Backrest

Who said a Gold Wing couldn't get any more comfortable? Our Driver Backrest features adjustable height plus forward tilt for maximum rider comfort and support, while its finely sculpted pad and durable cover perfectly match the overall styling of the OEM seat.

Includes backrest receiver that mounts to the bottom of the seat pan for easy installation and secure operation

Adjustable height, forward tilt positioning and easy removal — all without tools

Folds forward and out of the way for passenger loading/unloading

Built-in pouch on the back of the pad offers convenient storage for small items

Cover is made from UV-resistant polyurethane material for strength and durability

Fits:

GL1800 2018/2020

Installation:

Omni Grips

Omni Grips for Gold Wing feature a clamshell design that easily installs over the factory grips to retain full OEM heat functionality but offer a significant upgrade in style.

Aluminum housings with premium EPDM rubber for grip and vibration dampening

Wide-style grip provides comfort and relieves hand fatigue

Two-piece clamshell design does not require removal of OEM grips

Angular cutouts with form-fitted rubber inserts match the lines of the bike

Styled to match the complete line of Omni products for 2018-later Gold Wing

Fits:

GL 1800 UP TO 2018

Installation:

Air Deflectors

Close the vents to direct engine heat and turbulent airflow around the cockpit, or open them up in cold-weather riding to redirect the warm air toward you. Our Air Deflectors adjust to multiple secure positions so you can direct airflow exactly where you want it, all while seamlessly blending in with the Gold Wing's front cowling.

Spring-loaded mechanism for secure adjustability

Durable ABS and shatter-resistant polycarbonate construction

Dark smoke tint for added style

FIts:

GL1800 UP TO 2018

Installation:

Adjustable Upper Air Deflectors

The perfect functional complement to the redesigned Kuryakyn Air

Deflectors for 2018-later Honda Gold Wing (P/N 6579, sold separately), these Adjustable Upper Air Deflectors open to redirect airflow into the cockpit to lessen buffeting and provide riders with a light, refreshing breeze!

Made from durable scratch- and shatter-resistant polycarbonate blades Dark smoke tint adds style and matches Kuryakyn P/N 6579 Air Deflectors for a clean, uniform look

Adjust to two positions: open and closed

Easy installation with simple hand tools

Fits:

GL1800 UP TO 2018

Installation:

Chrome Frame Cover

This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from industry-leading materials using up-to-date equipment, it ensures everlasting reliability and enduring value. This product is distinguished by total quality assurance, unsurpassed by anybody else.

Fits:

GL1800 UP TO 2018

Installation:

ENGINE SIDE COVERS CHROME

Show Chrome Accessories® has designed a pair of brilliant chrome engine side covers, highly requested for the 2018 and newer Gold Wing. These custom covers replace the small OEM left and right black pieces with a pair of full panels to cover the engine area. Each incorporates 3 rubber toe scuff inserts, to not only add style, but minimize scuffing. As with the OEM, the left side mounts with 2 bosses and the right reuses OEM screws. The left incorporates a large foam backer to absorb some sound, that is also heat resistant.

Fits:

GL1800 UP 2018.

Installation:

Omni Frame Covers conceal the Gold Wing's twin-spar frame rails for a clean, fully covered look. Follows factory design cues for a seamless integration with OEM accents and body panels.

Lightweight and durable ABS construction with premium chrome plating

Matte black insert plates prevent boot scuffs on the chrome

Replaces the stock swingarm pivot cover

Easy to install reusing stock hardware/fasteners

Fits:

GL1800 UP TO 2018

Installation:

Omni LED Rear Saddlebag Accents

Omni L.E.D. Rear Saddlebag Accents look right at home flowing with the outside and lower edges of the saddlebags' rear surface to add depth and intense auxiliary run-turn-brake illumination. Styled to match stock lighting components for seamless integration.

Requires Plug-&-Play Wiring Adapter, P/N 3268, sold separately

If bike is already equipped with P/N 3268 and all three outputs are used, all that is needed is Y-Connector Kit, P/N 3269, sold separately

Provides red run/brake and amber turn signal functionality

Illumination and durable polycarbonate red lenses are styled to match stock lighting components for seamless integration

Fits:

GL1800 UP 2018

Installation:

Omni LED Side Saddlebag Inserts

Ditch the factory saddlebag reflectors for something a lot more functional. Omni L.E.D. Side Saddlebag Inserts replace the simplistic reflectors with auxiliary red run-brake and amber turn signal lighting. Choose chrome or satin black injection-molded ABS housings with red polycarbonate lenses that deliver an aesthetic upgrade when the bike's powered off.

Direct replacements for the stock side saddlebag reflectors

Provides ultra-bright red run-brake and amber turn signal functionality

Durable injection-molded ABS housings, polycarbonate lenses

Requires Kuryakyn Wiring Adapter (P/N 3268, sold separately) for plug-&-play installation

Fits:

GL1800 UP 2018

Installation:

Wiring Adapter

A must-have to make all Kuryakyn Omni L.E.D. lighting products plug-&-play for '18-up Honda Gold Wings. The Wiring Adapter Kit (P/N 3268) supports up to three Kuryakyn lighted accessories and features sealed, high-quality connectors. The Y-Connector Kit (P/N 3269) lets you add even more lighted accessories without having to purchase an additional adapter.

Wiring Adapter Kit supports up to three Kuryakyn lighted accessories

Matches OEM connectors easily accessible beneath the seat

Y-Connector Kit allows installation of four or more additional Kuryakyn lighted accessories w/out separate adapter purchase

Wiring Adapter Kit and Y-Connector Kits sold separately

Fits:

GL1800 UP 2018

Installation:

Omni LED Fork Inserts

Ditch the fork-mounted reflectors for something guaranteed to get you noticed.Full-time white running lights convert to amber turn signals when actuated, with intense L.E.D. output that lights up the Gold Wing's lower front end.

Provides auxiliary white running lights and amber turn signals

Direct replacement for the stock fork-mounted reflectors Injection-molded ABS housings with reflective smoke polycarbonate lenses

Offered in chrome or satin black finishes Requires Kuryakyn Wiring

Adapter, P/N 3268 (sold separately), for plug-&-play installation (one adapter allows installation of up to three Kuryakyn lighting products)

Fits:

GL1800 UP 2018

Installation:

Clutch or Brake Perch Mount

Perfect for iPhone®! Easily mount and secure an iPhone®, iPod®, smartphone, GPS or small device to your clutch or brake perch in just seconds. An adjustable swivel head allows movement for perfect positioning and disconnects in seconds! Each system includes a device holder of your choosing and Standard Accessory Mount. Standard Cradle holds devices measuring 1-5/8" to 3-5/8" wide. Large Cradle holds devices measuring 3-5/8" to 6" wide.

Fits:

All models.

Installation:

USB power source Black

Two USB ports (bottom = 1.0A and top = 2.1A) provide enough output for charging any modern device, including tablets. Mount anywhere you choose including inside your tour trunk, on the dash, or on your handlebars.

Fits:

All models.

Installation:

Usb power source

Two USB ports (bottom = 1.0A and top = 2.1A) provide enough output for charging any modern device, including tablets. Mount anywhere you choose including inside your tour trunk, on the dash, or on your handlebars.

Fits:

All models.

Installation:

Beverage Carrier Universal Drink Holders

Our most popular option to accommodate virtually any drink! Easy on, easy off snap design PVC leather Beverage Carrier easily holds most cups, cans or bottles, and is collapsible for storage. Additionally, the quick-detach thumbscrew mount leaves a simple clamp when not in use. Drink Ring has 3" inside diameter.

Fits:

All models.

Installation:

Electrical Power Point

Keep your cell phone, GPS, air pump or any other electrical device charged while on the road. Built into our Silver Bullet light housing and comes with cigarette lighter and everything you need to connect directly to your battery with a quick disconnect. Mount it above your handlebars or check for tank clearance and mount it below.

Fits:

All models

Installation:

Stainless Steel Mug Drink Holders

Whether sipping on hot or cold beverages, the insulated Stainless Mug & Drink Holder maintains your desired temperature for hours! The drink holder easily mounts on handlebars or clutch/brake perch mounts, and the quick-detach thumb screw offers easy removal when not in use.

Installation:

Mesh Basket Universal Drink Holders

Mesh basket features "fingers" to firmly grasp onto various-sized containers to keep your drink in the holder and not on you! Quick-detach thumbscrew mount leaves a simple clamp when not in use.

Installation: