Parite avant

ISO®-Grips

For the rider who demands the ultimate in comfort and style. Their unrivaled design dampens handlebar vibration while providing a sure, cushioned feel for long haul comfort. Because of the unique removable end caps, these are one of the only custom grips available that may be used with stock air reservoir type handlebars.

Fits:

GL1800 2001/2017

F6B 2013/2017

Installation:

Grip End Weights

Few things can take the enjoyment out of a great ride like numb, tingling fingers. Our grips are an excellent first step to keep vibration in check, but now you can improve their legendary comfort even more! Grip End Weights quickly install on the end of each Grip adding mass and length to further reduce high-amplitude handlebar vibration. Their sculpted appearance and bright chrome finish also add a high-tech look to your already hot-looking grips.

Fits:

GL1800 2001/2017

Installation:

ISO®-Grips

Now you can have the luxurious feel and custom look of our ISO-Grips without losing the heat! This clamshell design attaches right over your stock grips allowing the heat to come through.

Fits:

GL1800 2001/2017

Installation:

LED Battery Gauge

Our L.E.D. Battery Gauge is an array of L.E.D.'s indicating the operating voltage of the bike's electrical system. Green L.E.D.'s represent the normal operating range of your charging system, 12.5v to 14.5v. Amber L.E.D.'s warn the rider that the bike is not charging. Red L.E.D.'s will flash if the reading drops below 10v or exceeds 15v to alert the rider of an impending stall or the possibility of damage to the battery &/or sensitive electronic components on the motorcycle. Simple two-wire connection & a compact size (about 2" x 3/4" x 3/16") make installation a breeze. A daylight sensor automatically adjusts the brightness of the L.E.D.'s. Universal fitment designed for all 12v charging systems.

Fits:

ALL MODELS Before 2017

Installation:

Ergo III Cruise Mounts

The ultimate cruise peg system designed for the rider who wants it all! No matter how tall or short the rider, our Ergo III will outfit you. Offering a full 1-1/2 inches of front to back adjustability & a rotational adjustable mounting hub it is sure to accommodate any rider for an unmatched level of comfort. Maximum comfort while cruising & the ability to carve up the corners. Featuring Automatic Lift Technology, the rider can push the peg lower to stretch out while cruising, then ...

Fits:

GL1800 2001/2017

Installation:

Ergo II Cruise Mounts

Ergo II Cruise Mounts are undeniably the best highway peg available for the GL1800. The sturdy two-piece clamp assembly is easily installed & locates the swingarm mounting point high & tight for excellent cornering clearance. With numerous footrest options & a wide range of adjustability, the Ergo II is sure to please.

Fits:

GL1800 2001/2017

Installation:

Ergo Cruise Peg Mounts

Ergonomically designed for maximum driver comfort, these mounts have an unbelievable range of adjustment for the tall, short or in-between rider. The articulated mounting bracket is made of highly polished stainless steel for extreme strength, great looks and simple installation. The 6" long chrome swingarm has an ingenious locking mechanism and is canted at a 6º angle, which angles the pegs just the right amount for ideal comfort.

Fits:

GL1500 1998/2001 GL1800 2001/2017

Installation:

TEARDROP M.C. COVERS

Add a little chrome to your bike with Show Chrome Accessories Teardrop Master Cylinder covers. Aluminum die cast cylinder cover in teardrop design is a perfect extra to the handlebar area. Comes as a pair, fits Honda GL1500, GL1800 2001-17, Valkyrie, VTX1800, VT1100 1987-96, VT1300 Fury/Interstate/Stateline/Sabre, Yamaha Royal Stars.

Fits:

GL1500 1988/2001 GL1800 2001/2017

Installation:

LED Speaker Grills

Designed as a direct replacement for the speaker grill and housings, these L.E.D. Speaker Grills feature stainless steel mesh and state of the art blue illumination. Plug-&-Play wiring means you'll spend less time on installation and more time riding.

Fits:

GL1800 2006/2017

Installation:

Timing Chain Cover Set

If your eyes hurt from looking at the ugly aluminum cam chain cover but you don't want the expense & hassle of having the cover chromed, you're in luck. Our chrome set covers the entire timing chain cover in minutes. The strong adhesive is specially designed for high temperatures. A chrome version of the stock screw-in cap is included.

FIts:

GL1800 2001/2017

Installation:

Handlebar Top Covers

Cockpit transformation taken to the next level with these awe inspiring pieces of eye candy. Cover those ground-casting edges left behind and show off your two-wheeled masterpiece. High-strength adhesive installation means virtually zero downtime.

Fits:

GL1800 2001/2017

Installation:

Front Speaker Top Trim

Give your dash a blast of sizzling style that you can see every time you ride. This perfectly sized accent adds much needed chrome to your dash with minimal effort. Bring your bike into the next dimension by showing off those rear speakers in style with the Passenger Speaker Outer Trim. Featuring a 3 dimensional depth design & just the right contour, your bike will shine in any light. Peel-&-stick.

Fits:

GL1800 2006/2017

Installation:

Dash top trim

Allows you to customize your motorcycle

Made of beautiful shiny chrome designed to show off its classic curves and raised lines

Created to give a classic 50's luxury car style Includes (1) Chrome Dash Top Trim, (1) Alcohol Pad;

Suggested for installation: Thoroughly clean the area of grease, oil, dirt or other debris to ensure proper adhesion

Compatible with Gold Wing models:

'06-'17 GL1800 and '13-'16 F6B

Installation:

Clutch or Brake Perch Mount

Perfect for iPhone®! Easily mount and secure an iPhone®, iPod®, smartphone, GPS or small device to your clutch or brake perch in just seconds. An adjustable swivel head allows movement for perfect positioning and disconnects in seconds! Each system includes a device holder of your choosing and Standard Accessory Mount. Standard Cradle holds devices measuring 1-5/8" to 3-5/8" wide. Large Cradle holds devices measuring 3-5/8" to 6" wide.

Fits:

All models.

Installation:

USB power source Black

Two USB ports (bottom = 1.0A and top = 2.1A) provide enough output for charging any modern device, including tablets. Mount anywhere you choose including inside your tour trunk, on the dash, or on your handlebars.

Fits:

All models.

Installation:

Usb power source

Two USB ports (bottom = 1.0A and top = 2.1A) provide enough output for charging any modern device, including tablets. Mount anywhere you choose including inside your tour trunk, on the dash, or on your handlebars.

Fits:

All models.

Installation:

Beverage Carrier Universal Drink Holders

Our most popular option to accommodate virtually any drink! Easy on, easy off snap design PVC leather Beverage Carrier easily holds most cups, cans or bottles, and is collapsible for storage. Additionally, the quick-detach thumbscrew mount leaves a simple clamp when not in use. Drink Ring has 3" inside diameter.

Fits:

All models.

Installation:

Electrical Power Point

Keep your cell phone, GPS, air pump or any other electrical device charged while on the road. Built into our Silver Bullet light housing and comes with cigarette lighter and everything you need to connect directly to your battery with a quick disconnect. Mount it above your handlebars or check for tank clearance and mount it below.

Fits:

All models

Installation:

Stainless Steel Mug Drink Holders

Whether sipping on hot or cold beverages, the insulated Stainless Mug & Drink Holder maintains your desired temperature for hours! The drink holder easily mounts on handlebars or clutch/brake perch mounts, and the quick-detach thumb screw offers easy removal when not in use.

Installation:

Mesh Basket Universal Drink Holders

Mesh basket features "fingers" to firmly grasp onto various-sized containers to keep your drink in the holder and not on you! Quick-detach thumbscrew mount leaves a simple clamp when not in use.

Installation:

Windshield Trim

You appreciate ooo's and ahh's from onlookers, so here's another chance to amaze the crowd. This Windshield Trim is a huge improvement over the plain black rubber it conceals - a pristine chrome finish punctuated with crisp L.E.D. turn signal accents. The result is a clean transition from the windshield to the fairing and a higher degree of visibility as well. A great look with simple plug-&-play installation!

Installation:

DRINK HOLDER

Bring virtually any can, bottle, or cup with you securely and in style with the Goldstrike™ Drink Holder. Chrome plated and made from tough neoprene rubber, this drink holder will really stand up to the elements.

Holds your drink secure with a contoured rubber net

Infinite adjustment with Ciro ball mount design

Rubber lined ring keeps your can or bottle from vibrating

Soft rubber net won’t scratch if it comes in contact with paint

Fits:

All

Installation:

BIG ASS™ DRINK HOLDER(NO MOUNT)

• The Ciro® Big Ass™ Drink Holder is the perfect way to bring that 30 oz. tumbler on the road with you.

• The durable neoprene rubber molded net is designed to securely grip your cup so there’s no worry of losing it.

• The rubber is also weatherproof and won’t deteriorate in the sun or elements you encounter on the road. 

• Designed to work with 30 oz. tumblers and other large bottles and cups.

• Made from durable neoprene rubber to grip and last.

• Mounts quickly to Ciro’s line of ball mounts.

• Features a 4-1/8” diameter opening.

• no mount.

Fits: 

Fits any Ciro ball mount.

Instalation: